*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->IRIX man pages -> sn0log (1)              


sn0log(1M)							    sn0log(1M)

NAME    [Toc]    [Back]

     sn0log - Read Origin and Onyx2 CPU	flash PROM log(s)

SYNOPSIS    [Toc]    [Back]

     sn0log [ -ws ] [ -a | hub_mon_device ]

DESCRIPTION    [Toc]    [Back]

     sn0log is run at system boot by /etc/rc2.d/S33sn0start.

     It	displays any messages that were	written	to one or all CPU board	flash
     PROM logs since the last time a sync mark was written to the log(s).  If
     the -s option is used, a sync mark	is automatically written to the

     Messages in a CPU board flash PROM	log may	include	analysis data for a
     prior system crash.

     The options are:

     -a	  Specifies that all CPU board flash PROM logs in the system should be
	  processed.  Otherwise, a single hub_mon_device must be specified.

     -s	  Specifies that the messages should be	appended to /var/adm/SYSLOG,
	  and that a sync mark should be written to the	log(s) marking the
	  amount of data already transferred from the log(s).

     -w	  Specifies that the whole log(s) should be output, not	just the
	  contents since the last sync mark was	written.

SEE ALSO    [Toc]    [Back]


									PPPPaaaaggggeeee 1111
[ Back ]
 Similar pages
Name OS Title
flash IRIX reprogram the flash PROM hardware on Origin and OCTANE machines
sn0msc IRIX Perform Origin and Onyx2 system controller operations
flashio IRIX reprogram the flash PROM hardware on Everest-based machines
prom IRIX PROM monitor
pcons OpenBSD SPARC64 PROM console interface
mmscd IRIX communicates with MMSC (including front panel display) on Origin2000 and Onyx2 rack systems
curorigin IRIX sets the origin of a cursor
mdSetOrigin IRIX control origin time for synchronization
mkpart IRIX Partition Configuration Tool for Origin
curs_beep IRIX curses bell and screen flash routines
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service