*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->OpenBSD man pages -> ccdconfig (8)              



NAME    [Toc]    [Back]

     ccdconfig - configuration utility for the concatenated  disk

SYNOPSIS    [Toc]    [Back]

     ccdconfig [-cv] ccd ileave flags dev [...]
     ccdconfig -C [-v] [-f config_file]
     ccdconfig -u [-v] ccd [...]
     ccdconfig -U [-v] [-f config_file]
     ccdconfig -g [-M core] [-N system] [ccd [...]]

DESCRIPTION    [Toc]    [Back]

     ccdconfig  is  used to dynamically configure and unconfigure
     disk devices, or ccds.  For more information about the  ccd,
see ccd(4).

     The options are as follows:

     -c       Configure  a  ccd.  This is the default behavior of

     -C      Configure all ccd devices listed in the ccd configuration file.

     -f config_file
             When  configuring or unconfiguring all devices, read
the file
             config_file instead of the default /etc/ccd.conf.

     -g      Dump the current ccd configuration in a format suitable for use
             as  the ccd configuration file.  If no arguments are
             every configured ccd is dumped.  Otherwise, the configuration of
             each  listed  ccd is dumped.  Only root can dump the
             (unless ccdconfig is made setgid kmem).

     -M core
             Extract values associated with the  name  list  from
core instead of
             the default /dev/mem.

     -N system
             Extract  the  name  list  from system instead of the
running kernel.

     -u      Unconfigure a ccd.

     -U      Unconfigure all ccd devices listed in the  ccd  configuration file.

     -v      Causes ccdconfig to be verbose.

     A  ccd  is described on the command line and in the ccd configuration file
     by the name of the ccd, the interleave factor, the ccd  configuration
     flags,  and a list of one or more devices.  The flags may be
     as a decimal number, a hexadecimal number, a comma-separated
list of
     strings, or the word ``none''.  The flags are as follows:

           CCDF_SWAP      0x01      Interleave should be dmmax.
           CCDF_UNIFORM   0x02      Use uniform interleave.
           CCDF_MIRROR    0x04      Enable data mirroring.
           CCDF_OLD        0x08      Use old unoptimized I/O protocol.

     The format in the configuration file appears exactly  as  if
it were entered
  on  the  command line.  Note that on the command line
and in the configuration
 file, the flags argument is optional.

           # /etc/ccd.conf
           # Configuration file for concatenated disk devices

           # ccd           ileave  flags   component devices
           ccd0            16      none    /dev/sd2e /dev/sd3e

FILES    [Toc]    [Back]

     /etc/ccd.conf  default ccd configuration file

EXAMPLES    [Toc]    [Back]

     The following command, executed from the command line, would
     ccd0  with  4  components  (/dev/sd2e, /dev/sd3e, /dev/sd4e,
/dev/sd5e), and
     an interleave factor of 32 blocks.

           # ccdconfig ccd0 32 0  /dev/sd2e  /dev/sd3e  /dev/sd4e

SEE ALSO    [Toc]    [Back]

     ccd(4), rc(8)

HISTORY    [Toc]    [Back]

     The ccdconfig command first appeared in NetBSD 1.0A.

OpenBSD      3.6                           July      17,     1995
[ Back ]
 Similar pages
Name OS Title
ccd FreeBSD Concatenated Disk driver
ccd OpenBSD concatenated disk driver
raidctl OpenBSD configuration utility for the RAIDframe disk driver
raidctl FreeBSD configuration utility for the RAIDframe disk driver
espconfig IRIX 0espconfig is a utility provided for the configuration ESP from the command line. This utility bypasses the we
fx IRIX disk utility
fddisk Tru64 FDI disk maintenance utility
diskperf IRIX Disk Performance Testing Utility
diskalign IRIX XLV Aligned Disk Striping Utility
dmrecord IRIX digital media hard-disk recording utility
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service