*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> rman (9)              



NAME    [Toc]    [Back]

     rman, rman_activate_resource, rman_await_resource,
     rman_deactivate_resource, rman_fini, rman_init, rman_manage_region,
     rman_release_resource, rman_reserve_resource,
     rman_reserve_resource_bound, rman_make_alignment_flags, rman_get_start,
     rman_get_end, rman_get_size, rman_get_flags, rman_set_virtual,
     rman_get_virtual, rman_set_bustag, rman_get_bustag, rman_set_bushandle,
     rman_get_bushandle, rman_set_rid, rman_get_rid -- resource management

SYNOPSIS    [Toc]    [Back]

     #include <sys/rman.h>

     rman_activate_resource(struct resource *r);

     rman_await_resource(struct resource *r, int pri2, int timo);

     rman_deactivate_resource(struct resource *r);

     rman_fini(struct rman *rm);

     rman_init(struct rman *rm);

     rman_manage_region(struct rman *rm, u_long start, u_long end);

     rman_release_resource(struct resource *r);

     struct resource *
     rman_reserve_resource(struct rman *rm, u_long start, u_long end,
	 u_long count, u_int flags, struct device *dev);

     struct resource *
     rman_reserve_resource_bound(struct rman *rm, u_long start, u_long end,
	 u_long count, u_long bound, u_int flags, struct device *dev);

     rman_make_alignment_flags(uint32_t size);

     rman_get_start(struct resource *r);

     rman_get_end(struct resource *r);

     rman_get_size(struct resource *r);

     rman_get_flags(struct resource *r);

     rman_set_virtual(struct resource *r, void *v);

     void *
     rman_get_virtual(struct resource *r);

     rman_set_bustag(struct resource *r, bus_space_tag_t t);

     rman_get_bustag(struct resource *r);

     rman_set_bushandle(struct resource *r, bus_space_handle_t h);

     rman_get_bushandle(struct resource *r);

     rman_set_rid(struct resource *r, int rid);

     rman_get_rid(struct resource *r);

DESCRIPTION    [Toc]    [Back]

     The rman set of functions provides a flexible resource management
     abstraction.  It is used extensively by the bus management code.  It
     implements the abstractions of region and resource.  A region descriptor
     is used to manage a region; this could be memory or some other form of
     bus space.

     Each region has a set of bounds.  Within these bounds, allocated segments
     may reside.  Each segment, termed a resource, has several properties
     which are represented by a 16-bit flag register, as follows.

     #define RF_ALLOCATED    0x0001 /* resource has been reserved */
     #define RF_ACTIVE	     0x0002 /* resource allocation has been activated */
     #define RF_SHAREABLE    0x0004 /* resource permits contemporaneous sharing */
     #define RF_TIMESHARE    0x0008 /* resource permits time-division sharing */
     #define RF_WANTED	     0x0010 /* somebody is waiting for this resource */
     #define RF_FIRSTSHARE   0x0020 /* first in sharing list */
     #define RF_PREFETCHABLE 0x0040 /* resource is prefetchable */

     The remainder of the flag bits are used to represent the desired alignment
 of the resource within the region.

     The rman_init() function initializes the region descriptor, pointed to by
     the rm argument, for use with the resource management functions.  It also
     initializes any mutexes associated with the structure.

     The rman_fini() function frees any structures associated with the structure
 pointed to by the rm argument.  If any of the resources within the
     managed region have the RF_ALLOCATED flag set, it will return EBUSY; otherwise,
 any mutexes associated with the structure will be released and
     destroyed, and the function will return 0.

     The rman_manage_region() function establishes the concept of a region
     which is under rman control.  The rman argument points to the region
     descriptor.  The start and end arguments specify the bounds of the

     NOTE: This interface is not robust against programming errors which add
     multiple copies of the same region.

     The rman_reserve_resource_bound() function is where the bulk of the rman
     logic is located.	It attempts to reserve a contiguous range in the specified
 region rm for the use of the device dev.  The caller can specify
     the start and end of an acceptable range, as well as alignment, and the
     code will attempt to find a free segment which fits.  The default behavior
 is to allocate an exclusive segment, unless the RF_SHAREABLE or
     RF_TIMESHARE flags are set, in which case a shared segment will be allocated.
  If this shared segment already exists, the caller has its device
     added to the list of consumers.

     The rman_reserve_resource() function is used to reserve resources within
     a previously established region.  It is a simplified interface to
     rman_reserve_resource_bound() which passes 0 for the flags argument.

     The rman_make_alignment_flags() function returns the flag mask corresponding
 to the desired alignment size.  This should be used when calling

     The rman_release_resource() function releases the reserved resource r.
     It may attempt to merge adjacent free resources.

     The rman_activate_resource() function marks a resource as active, by setting
 the RF_ACTIVE flag.  If this is a time shared resource, and the
     caller has not yet acquired the resource, the function returns EBUSY.

     The rman_deactivate_resource() function marks a resource r as inactive,
     by clearing the RF_ACTIVE flag.  If other consumers are waiting for this
     range, it will wakeup their threads.

     The rman_await_resource() function performs an asynchronous wait for a
     resource r to become inactive, that is, for the RF_ACTIVE flag to be
     cleared.  It is used to enable cooperative sharing of a resource which
     can only be safely used by one thread at a time.  The arguments pri and
     timo are passed to the rman_await_resource() function.

     The rman_get_start(), rman_get_end(), rman_get_size(), and
     rman_get_flags() functions return the bounds, size and flags of the previously
 reserved resource r.

     The rman_set_bustag() function associates a bus_space_tag_t t with the
     resource r.  The rman_get_bustag() function is used to retrieve this tag
     once set.

     The rman_set_bushandle() function associates a bus_space_handle_t h with
     the resource r.  The rman_get_bushandle() function is used to retrieve
     this handle once set.

     The rman_set_virtual() function is used to associate a kernel virtual
     address with a resource r.  The rman_get_virtual() function can be used
     to retrieve the KVA once set.

     The rman_set_rid() function associates a resource identifier with a
     resource r.  The rman_get_rid() function retrieves this RID.

     The rman_get_device() function returns a pointer to the device which
     reserved the resource r.

SEE ALSO    [Toc]    [Back]

     bus_activate_resource(9), bus_alloc_resource(9), bus_release_resource(9),
     bus_set_resource(9), mutex(9)

AUTHORS    [Toc]    [Back]

     This man page was written by Bruce M Simpson <bms@spc.org>.

FreeBSD 5.2.1			 May 12, 2003			 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
aurema Tru64 Aurema's ARMTech (Active Resource Management Technology) resource management suite
armtech Tru64 Aurema's ARMTech (Active Resource Management Technology) resource management suite
amutil HP-UX controls various disk array management functions
pam_dce HP-UX authentication, account, and password management PAM functions for DCE
rad_get_cpus Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
rad_get_max Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
rad_get_info Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
rad_get_freemem Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
rad_get_physmem Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
rad_get_state Tru64 Query resource complements of a Resource Affinity Domain (libnuma)
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service