*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> procfs (5)              



NAME    [Toc]    [Back]

     procfs -- process file system

SYNOPSIS    [Toc]    [Back]

     proc	     /proc   procfs  rw 0 0

DESCRIPTION    [Toc]    [Back]

     The process file system, or procfs, implements a view of the system
     process table inside the file system.  It is normally mounted on /proc,
     and is required for the complete operation of programs such as ps(1) and

     The procfs provides a two-level view of process space, unlike the previous
 FreeBSD 1.1 procfs implementation.  At the highest level, processes
     themselves are named, according to their process ids in decimal, with no
     leading zeros.  There is also a special node called curproc which always
     refers to the process making the lookup request.

     Each node is a directory which contains the following entries:

     Each directory contains several files:

     ctl     a write-only file which supports a variety of control operations.
	     Control commands are written as strings to the ctl file.  The
	     control commands are:
	     attach  stops the target process and arranges for the sending
		     process to become the debug control process.
	     detach  continue execution of the target process and remove it
		     from control by the debug process (which need not be the
		     sending process).
	     run     continue running the target process until a signal is
		     delivered, a breakpoint is hit, or the target process
	     step    single step the target process, with no signal delivery.
	     wait    wait for the target process to come to a steady state
		     ready for debugging.  The target process must be in this
		     state before any of the other commands are allowed.

	     The string can also be the name of a signal, lower case and without
 the SIG prefix, in which case that signal is delivered to the
	     process (see sigaction(2)).

     dbregs  The debug registers as defined by struct dbregs in
	     <machine/reg.h>.  dbregs is currently only implemented on the
	     i386 architecture.

     etype   The type of the executable referenced by the file entry.

     file    A symbolic link to the file from which the process text was read.
	     This can be used to gain access to the process' symbol table, or
	     to start another copy of the process.  If the file cannot be
	     found, the link target is `unknown'.

     fpregs  The floating point registers as defined by struct fpregs in
	     <machine/reg.h>.  fpregs is only implemented on machines which
	     have distinct general purpose and floating point register sets.

     map     A map of the process' virtual memory.

     mem     The complete virtual memory image of the process.	Only those
	     address which exist in the process can be accessed.  Reads and
	     writes to this file modify the process.  Writes to the text segment
 remain private to the process.

     note    Used for sending signals to the process.  Not implemented.

     notepg  Used for sending signal to the process group.  Not implemented.

     regs    Allows read and write access to the process' register set.  This
	     file contains a binary data structure struct regs defined in
	     <machine/reg.h>.  regs can only be written when the process is

     rlimit  This is a read-only file containing the process current and maximum
 limits.  Each line is of the format rlimit current max, with
	     -1 indicating infinity.

     status  The process status.  This file is read-only and returns a single
	     line containing multiple space-separated fields as follows:

	     +o	 command name
	     +o	 process id
	     +o	 parent process id
	     +o	 process group id
	     +o	 session id
	     +o	 major,minor of the controlling terminal, or -1,-1 if there is
		 no controlling terminal.
	     +o	 a list of process flags: ctty if there is a controlling terminal,
 sldr if the process is a session leader, noflags if
		 neither of the other two flags are set.
	     +o	 the process start time in seconds and microseconds, comma
	     +o	 the user time in seconds and microseconds, comma separated.
	     +o	 the system time in seconds and microseconds, comma separated.
	     +o	 the wait channel message
	     +o	 the process credentials consisting of the effective user id
		 and the list of groups (whose first member is the effective
		 group id) all comma separated.
	     +o	 the hostname of the jail in which the process runs, or `-' to
		 indicate that the process is not running within a jail.

     In a normal debugging environment, where the target is fork/exec'd by the
     debugger, the debugger should fork and the child should stop itself (with
     a self-inflicted SIGSTOP for example).  The parent should issue a wait
     and then an attach command via the appropriate ctl file.  The child
     process will receive a SIGTRAP immediately after the call to exec (see

     Each node is owned by the process's user, and belongs to that user's primary
 group, except for the mem node, which belongs to the kmem group.

FILES    [Toc]    [Back]

     /proc		    normal mount point for the procfs.
     /proc/pid		    directory containing process information for
			    process pid.
     /proc/curproc	    directory containing process information for the
			    current process
     /proc/curproc/cmdline  the process executable name
     /proc/curproc/ctl	    used to send control messages to the process
     /proc/curproc/etype    executable type
     /proc/curproc/file     executable image
     /proc/curproc/fpregs   the process floating point register set
     /proc/curproc/map	    virtual memory map of the process
     /proc/curproc/mem	    the complete virtual address space of the process
     /proc/curproc/note     used for signaling the process
     /proc/curproc/notepg   used for signaling the process group
     /proc/curproc/regs     the process register set
     /proc/curproc/rlimit   the process current and maximum rlimit
     /proc/curproc/status   the process' current status

SEE ALSO    [Toc]    [Back]

     mount(2), sigaction(2), unmount(2), mount_procfs(8), pseudofs(9)

AUTHORS    [Toc]    [Back]

     This manual page written by Garrett Wollman, based on the description
     provided by Jan-Simon Pendry, and revamped later by Mike Pritchard.

FreeBSD 5.2.1		       December 4, 2001 		 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
mount_procfs OpenBSD mount the process file system
linprocfs FreeBSD Linux process file system
syncer FreeBSD file system synchronizer kernel process
proc Tru64 The process (/proc) file system and associated ioctl requests
mount_nullfs FreeBSD mount a loopback file system sub-tree; demonstrate the use of a null file system layer
vxfsconvert HP-UX convert a file system to a vxfs file system or upgrade a VxFS disk layout version.
setpgrp IRIX set process group ID (System V and 4.3BSD)
fdetach Tru64 Detach a STREAMS-based file descriptor from a file in the file system name space
fattach Tru64 Attach a STREAMS-based file descriptor to a file in the file system name space
semume HP-UX maximum number of System V IPC undo entries per process
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service