*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->NetBSD man pages -> intro (2)              
Title
Content
Arch
Section
 

INTRO(2)

Contents


NAME    [Toc]    [Back]

     intro, errno - introduction to system calls and error numbers

SYNOPSIS    [Toc]    [Back]

     #include <errno.h>

DESCRIPTION    [Toc]    [Back]

     This section provides an overview of the system calls, their error
     returns, and other common definitions and concepts.

DIAGNOSTICS    [Toc]    [Back]

     Nearly all of the system calls provide an error number in the external
     variable errno.  errno is implemented as a macro which expands to a modifiable
 lvalue of type int.

     When a system call detects an error, it returns an integer value indicating
 failure (usually -1) and sets the variable errno accordingly.  <This
     allows interpretation of the failure on receiving a -1 and to take action
     accordingly.> Successful calls never set errno; once set, it remains
     until another error occurs.  It should only be examined after an error.
     Note that a number of system calls overload the meanings of these error
     numbers, and that the meanings must be interpreted according to the type
     and circumstances of the call.

     The manual page for each system call will list some of the common errno
     codes that system call can return, but that should not be considered an
     exhaustive list, i.e.  a properly written program should be able to
     gracefully recover from any error that a system call might return.  Documenting
 all the error codes that a system call can return in a more specification-like
 manner would take more resources than this project has
     available.

     The following is a complete list of the errors and their names as given
     in <errno.h>.

     0 Error 0.  Not used.

     1 EPERM Operation not permitted.  An attempt was made to perform an operation
 limited to processes with appropriate privileges or to the
             owner of a file or other resources.

     2 ENOENT No such file or directory.  A component of a specified pathname
             did not exist, or the pathname was an empty string.

     3 ESRCH No such process.  No process could be found corresponding to that
             specified by the given process ID.

     4 EINTR Interrupted function call.  An asynchronous signal (such as
             SIGINT or SIGQUIT) was caught by the process during the execution
             of an interruptible function.  If the signal handler performs a
             normal return, the interrupted function call will seem to have
             returned the error condition.

     5 EIO Input/output error.  Some physical input or output error occurred.
             This error will not be reported until a subsequent operation on
             the same file descriptor and may be lost (over written) by any
             subsequent errors.

     6 ENXIO No such device or address.  Input or output on a special file
             referred to a device that did not exist, or made a request beyond
             the limits of the device.  This error may also occur when, for
             example, a tape drive is not online or no disk pack is loaded on
             a drive.

     7 E2BIG Arg list too long.  The number of bytes used for the argument and
             environment list of the new process exceeded the current limit of
             2**18 bytes (ARG_MAX in <sys/syslimits.h>).

     8 ENOEXEC Exec format error.  A request was made to execute a file that,
             although it has the appropriate permissions, was not in the format
 required for an executable file.

     9 EBADF Bad file descriptor.  A file descriptor argument was out of
             range, referred to no open file, had been revoked by revoke(2),
             or a read(2) (or write(2)) request was made to a file that was
             only open for writing (or reading).

     10 ECHILD No child processes.  A wait(2) or waitpid(2) function was executed
 by a process that had no existing or unwaited-for child
             processes.

     11 EDEADLK Resource deadlock avoided.  An attempt was made to lock a system
 resource that would have resulted in a deadlock situation.

     12 ENOMEM Cannot allocate memory.  The new process image required more
             memory than was allowed by the hardware or by system-imposed memory
 management constraints.  A lack of swap space is normally
             temporary; however, a lack of core is not.  Soft limits may be
             increased to their corresponding hard limits.

     13 EACCES Permission denied.  An attempt was made to access a file in a
             way forbidden by its file access permissions.

     14 EFAULT Bad address.  The system detected an invalid address in
             attempting to use an argument of a call.  The reliable detection
             of this error cannot be guaranteed and when not detected may
             result in the generation of a signal, indicating an address violation,
 which is sent to the process.

     15 ENOTBLK Not a block device.  A block device operation was attempted on
             a non-block device or file.

     16 EBUSY Resource busy.  An attempt to use a system resource which was in
             use at the time in a manner which would have conflicted with the
             request.

     17 EEXIST File exists.  An existing file was mentioned in an inappropriate
 context, for instance, as the new link name in a link(2)
             function.

     18 EXDEV Improper link.  A hard link to a file on another file system was
             attempted.

     19 ENODEV Operation not supported by device.  An attempt was made to
             apply an inappropriate function to a device, for example, trying
             to read a write-only device such as a printer.

     20 ENOTDIR Not a directory.  A component of the specified pathname
             existed, but it was not a directory, when a directory was
             expected.

     21 EISDIR Is a directory.  An attempt was made to open a directory with
             write mode specified.

     22 EINVAL Invalid argument.  Some invalid argument was supplied.  (For
             example, specifying an undefined signal to a signal(3) or kill(2)
             function).

     23 ENFILE Too many open files in system.  Maximum number of file descriptors
 allowable on the system has been reached and a requests for
             an open cannot be satisfied until at least one has been closed.

     24 EMFILE Too many open files.  <As released, the limit on the number of
             open files per process is 64.> The getrlimit(2) call with the
             RLIMIT_NOFILE resource will obtain the current limit.

     25 ENOTTY Inappropriate ioctl for device.  A control function (see
             ioctl(2)) was attempted for a file or special device for which
             the operation was inappropriate.

     26 ETXTBSY Text file busy.  The new process was a pure procedure (shared
             text) file which was open for writing by another process, or
             while the pure procedure file was being executed an open(2) call
             requested write access.

     27 EFBIG File too large.  The size of a file exceeded the maximum.  (The
             system-wide maximum file size is 2**63 bytes.  Each file system
             may impose a lower limit for files contained within it).

     28 ENOSPC Device out of space.  A write(2) to an ordinary file, the creation
 of a directory or symbolic link, or the creation of a
             directory entry failed because no more disk blocks were available
             on the file system, or the allocation of an inode for a newly
             created file failed because no more inodes were available on the
             file system.

     29 ESPIPE Illegal seek.  An lseek(2) function was issued on a socket,
             pipe or FIFO.

     30 EROFS Read-only file system.  An attempt was made to modify a file or
             directory was made on a file system that was read-only at the
             time.

     31 EMLINK Too many links.  The number of hard links to a single file has
             exceeded the maximum.  (The system-wide maximum number of hard
             links is 32767.  Each file system may impose a lower limit for
             files contained within it).

     32 EPIPE Broken pipe.  A write on a pipe, socket or FIFO for which there
             is no process to read the data.

     33 EDOM Numerical argument out of domain.  A numerical input argument was
             outside the defined domain of the mathematical function.

     34 ERANGE Numerical result out of range.  A numerical result of the function
 was too large to fit in the available space (perhaps
             exceeded precision).

     35 EAGAIN Resource temporarily unavailable.  This is a temporary condition
 and later calls to the same routine may complete normally.

     36 EINPROGRESS Operation now in progress.  An operation that takes a long
             time to complete (such as a connect(2)) was attempted on a nonblocking
 object (see fcntl(2)).

     37 EALREADY Operation already in progress.  An operation was attempted on
             a non-blocking object that already had an operation in progress.

     38 ENOTSOCK Socket operation on non-socket.  Self-explanatory.

     39 EDESTADDRREQ Destination address required.  A required address was
             omitted from an operation on a socket.

     40 EMSGSIZE Message too long.  A message sent on a socket was larger than
             the internal message buffer or some other network limit.

     41 EPROTOTYPE Protocol wrong type for socket.  A protocol was specified
             that does not support the semantics of the socket type requested.
             For example, you cannot use the ARPA Internet UDP protocol with
             type SOCK_STREAM.

     42 ENOPROTOOPT Protocol not available.  A bad option or level was specified
 in a getsockopt(2) or setsockopt(2) call.

     43 EPROTONOSUPPORT Protocol not supported.  The protocol has not been
             configured into the system or no implementation for it exists.

     44 ESOCKTNOSUPPORT Socket type not supported.  The support for the socket
             type has not been configured into the system or no implementation
             for it exists.

     45 EOPNOTSUPP Operation not supported.  The attempted operation is not
             supported for the type of object referenced.  Usually this occurs
             when a file descriptor refers to a file or socket that cannot
             support this operation, for example, trying to accept a connection
 on a datagram socket.

     46 EPFNOSUPPORT Protocol family not supported.  The protocol family has
             not been configured into the system or no implementation for it
             exists.

     47 EAFNOSUPPORT Address family not supported by protocol family.  An
             address incompatible with the requested protocol was used.  For
             example, you shouldn't necessarily expect to be able to use NS
             addresses with ARPA Internet protocols.

     48 EADDRINUSE Address already in use.  Only one usage of each address is
             normally permitted.

     49 EADDRNOTAVAIL Cannot assign requested address.  Normally results from
             an attempt to create a socket with an address not on this
             machine.

     50 ENETDOWN Network is down.  A socket operation encountered a dead network.


     51 ENETUNREACH Network is unreachable.  A socket operation was attempted
             to an unreachable network.

     52 ENETRESET Network dropped connection on reset.  The host you were connected
 to crashed and rebooted.

     53 ECONNABORTED Software caused connection abort.  A connection abort was
             caused internal to your host machine.

     54 ECONNRESET Connection reset by peer.  A connection was forcibly closed
             by a peer.  This normally results from a loss of the connection
             on the remote socket due to a timeout or a reboot.

     55 ENOBUFS No buffer space available.  An operation on a socket or pipe
             was not performed because the system lacked sufficient buffer
             space or because a queue was full.

     56 EISCONN Socket is already connected.  A connect(2) request was made on
             an already connected socket; or, a sendto(2) or sendmsg(2)
             request on a connected socket specified a destination when
             already connected.

     57 ENOTCONN Socket is not connected.  An request to send or receive data
             was disallowed because the socket was not connected and (when
             sending on a datagram socket) no address was supplied.

     58 ESHUTDOWN Cannot send after socket shutdown.  A request to send data
             was disallowed because the socket had already been shut down with
             a previous shutdown(2) call.

     60 ETIMEDOUT Operation timed out.  A connect(2) or send(2) request failed
             because the connected party did not properly respond after a
             period of time.  (The timeout period is dependent on the communication
 protocol).

     61 ECONNREFUSED Connection refused.  No connection could be made because
             the target machine actively refused it.  This usually results
             from trying to connect to a service that is inactive on the foreign
 host.

     62 ELOOP Too many levels of symbolic links.  A path name lookup involved
             more than 32 (MAXSYMLINKS) symbolic links.

     63 ENAMETOOLONG File name too long.  A component of a path name exceeded
             255 (MAXNAMELEN) characters, or an entire path name exceeded 1023
             (MAXPATHLEN-1) characters.

     64 EHOSTDOWN Host is down.  A socket operation failed because the destination
 host was down.

     65 EHOSTUNREACH No route to host.  A socket operation was attempted to an
             unreachable host.

     66 ENOTEMPTY Directory not empty.  A directory with entries other than
             `.' and `..' was supplied to a remove directory or rename call.

     67 EPROCLIM Too many processes.

     68 EUSERS Too many users.  The quota system ran out of table entries.

     69 EDQUOT Disc quota exceeded.  A write(2) to an ordinary file, the creation
 of a directory or symbolic link, or the creation of a
             directory entry failed because the user's quota of disk blocks
             was exhausted, or the allocation of an inode for a newly created
             file failed because the user's quota of inodes was exhausted.

     70 ESTALE Stale NFS file handle.  An attempt was made to access an open
             file (on an NFS filesystem) which is now unavailable as referenced
 by the file descriptor.  This may indicate the file was
             deleted on the NFS server or some other catastrophic event
             occurred.

     72 EBADRPC RPC struct is bad.  Exchange of RPC information was unsuccessful.


     73 ERPCMISMATCH RPC version wrong.  The version of RPC on the remote peer
             is not compatible with the local version.

     74 EPROGUNAVAIL RPC prog. not avail.  The requested program is not registered
 on the remote host.

     75 EPROGMISMATCH Program version wrong.  The requested version of the
             program is not available on the remote host (RPC).

     76 EPROCUNAVAIL Bad procedure for program.  An RPC call was attempted for
             a procedure which doesn't exist in the remote program.

     77 ENOLCK No locks available.  A system-imposed limit on the number of
             simultaneous file locks was reached.

     78 ENOSYS Function not implemented.  Attempted a system call that is not
             available on this system.

     79 EFTYPE Inappropriate file type or format.  Attempted a file operation
             on a file of a type for which it was invalid.

     80 EAUTH Authentication error.  Attempted to use an invalid authentication
 ticket to mount an NFS filesystem.

     81 ENEEDAUTH Need authenticator.  An authentication ticket must be
             obtained before the given NFS filesystem may be mounted.

     82 EIDRM Identifier removed.  An IPC identifier was removed while the
             current process was waiting on it.

     83 ENOMSG No message of the desired type.  An IPC message queue does not
             contain a message of the desired type, or a message catalog does
             not contain the requested message.

     84 EOVERFLOW Value too large to be stored in data type.  A numerical
             result of the function was too large to be stored in the callerprovided
 space.

     85 EILSEQ Illegal byte sequence.  A wide character/multibyte character
             encoding error occurred.

DEFINITIONS    [Toc]    [Back]

     Process ID.
             Each active process in the system is uniquely identified by a
             non-negative integer called a process ID.  The range of this ID
             is from 0 to 30000.

     Parent process ID
             A new process is created by a currently active process; (see
             fork(2)).  The parent process ID of a process is initially the
             process ID of its creator.  If the creating process exits, the
             parent process ID of each child is set to the ID of a system process,
 init(8).

     Process Group
             Each active process is a member of a process group that is identified
 by a non-negative integer called the process group ID.
             This is the process ID of the group leader.  This grouping permits
 the signaling of related processes (see termios(4)) and the
             job control mechanisms of csh(1).

     Session
             A session is a set of one or more process groups.  A session is
             created by a successful call to setsid(2), which causes the
             caller to become the only member of the only process group in the
             new session.

     Session leader
             A process that has created a new session by a successful call to
             setsid(2), is known as a session leader.  Only a session leader
             may acquire a terminal as its controlling terminal (see
             termios(4)).

     Controlling process
             A session leader with a controlling terminal is a controlling
             process.

     Controlling terminal
             A terminal that is associated with a session is known as the controlling
 terminal for that session and its members.

     Terminal Process Group ID
             A terminal may be acquired by a session leader as its controlling
             terminal.  Once a terminal is associated with a session, any of
             the process groups within the session may be placed into the
             foreground by setting the terminal process group ID to the ID of
             the process group.  This facility is used to arbitrate between
             multiple jobs contending for the same terminal.  (See csh(1) and
             tty(4) for more information on job control.)

     Orphaned Process Group
             A process group is considered to be orphaned if it is not under
             the control of a job control shell.  More precisely, a process
             group is orphaned when none of its members has a parent process
             that is in the same session as the group, but is in a different
             process group.  Note that when a process exits, the parent process
 for its children is changed to be init(8), which is in a
             separate session.  Not all members of an orphaned process group
             are necessarily orphaned processes (those whose creating process
             has exited).  The process group of a session leader is orphaned
             by definition.

     Real User ID and Real Group ID
             Each user on the system is identified by a positive integer
             termed the real user ID.

             Each user is also a member of one or more groups.  One of these
             groups is distinguished from others and used in implementing
             accounting facilities.  The positive integer corresponding to
             this distinguished group is termed the real group ID.

             All processes have a real user ID and real group ID.  These are
             initialized from the equivalent attributes of the process that
             created it.

     Effective User Id, Effective Group Id, and Group Access List
             Access to system resources is governed by two values: the effective
 user ID, and the group access list.  The first member of the
             group access list is also known as the effective group ID.  (In
             POSIX.1, the group access list is known as the set of supplementary
 group IDs, and it is unspecified whether the effective group
             ID is a member of the list.)

             The effective user ID and effective group ID are initially the
             process's real user ID and real group ID respectively.  Either
             may be modified through execution of a set-user-ID or set-groupID
 file (possibly by one its ancestors) (see execve(2)).  By convention,
 the effective group ID (the first member of the group
             access list) is duplicated, so that the execution of a set-groupID
 program does not result in the loss of the original (real)
             group ID.

             The group access list is a set of group IDs used only in determining
 resource accessibility.  Access checks are performed as
             described below in "File Access Permissions".

     Saved Set User ID and Saved Set Group ID
             When a process executes a new file, the effective user ID is set
             to the owner of the file if the file is set-user-ID, and the
             effective group ID (first element of the group access list) is
             set to the group of the file if the file is set-group-ID.  The
             effective user ID of the process is then recorded as the saved
             set-user-ID, and the effective group ID of the process is
             recorded as the saved set-group-ID.  These values may be used to
             regain those values as the effective user or group ID after
             reverting to the real ID (see setuid(2)).  (In POSIX.1, the saved
             set-user-ID and saved set-group-ID are optional, and are used in
             setuid and setgid, but this does not work as desired for the
             super-user.)

     Super-user
             A process is recognized as a super-user process and is granted
             special privileges if its effective user ID is 0.

     Special Processes
             The processes with process IDs of 0, 1, 2, 3, and 4 are special.
             Process 0 is the scheduler.  Process 1 is the initialization process
 init(8), and is the ancestor (parent) of every other process
             in the system.  It is used to control the process structure.
             Process 2 is the paging daemon.  Process 3 is the reaper, which
             handles deallocating resources for exiting processes.  Process 4
             is ioflush, which replaces the old update program that periodically
 flushes the disk buffer cache.

     Descriptor
             An integer assigned by the system when a file is referenced by
             open(2) or dup(2), or when a socket is created by pipe(2),
             socket(2), or socketpair(2), which uniquely identifies an access
             path to that file or socket from a given process or any of its
             children.

     File Name
             Names consisting of up to 255 (MAXNAMELEN) characters may be used
             to name an ordinary file, special file, or directory.

             These characters may be selected from the set of all ASCII character
 excluding 0 (NUL) and the ASCII code for `/' (slash).  (The
             parity bit, bit 7, must be 0).

             Note that it is generally unwise to use `*', `?', `[' or `]' as
             part of file names because of the special meaning attached to
             these characters by the shell.

     Path Name
             A path name is a NUL-terminated character string starting with an
             optional slash `/', followed by zero or more directory names separated
 by slashes, optionally followed by a file name.  The total
             length of a path name must be less than 1024 (MAXPATHLEN) characters.


             If a path name begins with a slash, the path search begins at the
             root directory.  Otherwise, the search begins from the current
             working directory.  A slash by itself names the root directory.
             An empty string is not a valid pathname.

     Directory
             A directory is a special type of file that contains entries that
             are references to other files.  Directory entries are called
             links.  By convention, a directory contains at least two links,
             `.' and `..', referred to as dot and dot-dot respectively.  Dot
             refers to the directory itself and dot-dot refers to its parent
             directory.

     Root Directory and Current Working Directory
             Each process has associated with it a concept of a root directory
             and a current working directory for the purpose of resolving path
             name searches.  A process's root directory need not be the root
             directory of the root file system.

     File Access Permissions
             Every file in the file system has a set of access permissions.
             These permissions are used in determining whether a process may
             perform a requested operation on the file (such as opening a file
             for writing).  Access permissions are established at the time a
             file is created.  They may be changed at some later time through
             the chmod(2) call.

             File access is broken down according to whether a file may be:
             read, written, or executed.  Directory files use the execute permission
 to control if the directory may be searched.

             File access permissions are interpreted by the system as they
             apply to three different classes of users: the owner of the file,
             those users in the file's group, anyone else.  Every file has an
             independent set of access permissions for each of these classes.
             When an access check is made, the system decides if permission
             should be granted by checking the access information applicable
             to the caller.

             Read, write, and execute/search permissions on a file are granted
             to a process if:

             The process's effective user ID is that of the super-user.
             (Note: even the super-user cannot execute a non-executable file).

             The process's effective user ID matches the user ID of the owner
             of the file and the owner permissions allow the access.

             The process's effective user ID does not match the user ID of the
             owner of the file, and either the process's effective group ID
             matches the group ID of the file, or the group ID of the file is
             in the process's group access list, and the group permissions
             allow the access.

             Neither the effective user ID nor effective group ID and group
             access list of the process match the corresponding user ID and
             group ID of the file, but the permissions for ``other users''
             allow access.

             Otherwise, permission is denied.

     Sockets and Address Families
             A socket is an endpoint for communication between processes.
             Each socket has queues for sending and receiving data.

             Sockets are typed according to their communications properties.
             These properties include whether messages sent and received at a
             socket require the name of the partner, whether communication is
             reliable, the format used in naming message recipients, etc.

             Each instance of the system supports some collection of socket
             types; consult socket(2) for more information about the types
             available and their properties.

             Each instance of the system supports some number of sets of communications
 protocols.  Each protocol set supports addresses of a
             certain format.  An Address Family is the set of addresses for a
             specific group of protocols.  Each socket has an address chosen
             from the address family in which the socket was created.

SEE ALSO    [Toc]    [Back]

      
      
     intro(3), perror(3)

HISTORY    [Toc]    [Back]

     An intro manual page appeared in Version 6 AT&T UNIX.

BSD                            November 25, 2003                           BSD
[ Back ]
 Similar pages
Name OS Title
intro Linux Introduction to system calls
intro Tru64 Introduction to system calls
errno Tru64 Introduction to system calls
intro HP-UX introduction to system calls
unlink HP-UX execute link() and unlink() system calls without error checking
link HP-UX execute link() and unlink() system calls without error checking
sgerfs IRIX improve the computed solution to a system of linear equations and provides error bounds and backward error est
cgerfs IRIX improve the computed solution to a system of linear equations and provides error bounds and backward error est
dgerfs IRIX improve the computed solution to a system of linear equations and provides error bounds and backward error est
zgerfs IRIX improve the computed solution to a system of linear equations and provides error bounds and backward error est
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service