*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->IRIX man pages -> egconfig (1)              


egconfig(1M)							  egconfig(1M)

NAME    [Toc]    [Back]

     egconfig -	configure gigabit ethernet interfaces

SYNOPSIS    [Toc]    [Back]

     /usr/etc/egconfig [ -l ] interface

DESCRIPTION    [Toc]    [Back]

     egconfig is executed at system startup time to download the firmware for
     each gigabit Ethernet (''egN'') interface configured into the system.
     After egconfig executes, it is still necessary to use ifconfig(1M)	to
     configure protocol	addresses and other parameters.

     egconfig is run automatically at system startup.  It should not normally
     be	necessary to execute it, unless	resetting the interface	is required.

OPTIONS    [Toc]    [Back]

     -l	  Disables auto-link-negotiation on the	specified interface.  This
	  should only be used when attaching to	other equipment	that does not
	  negotiate correctly.

SEE ALSO    [Toc]    [Back]

     ifconfig(1M), network(1M),	ethernet(7).

FILES    [Toc]    [Back]

     /etc/config/egN.options  per-interface options (for egconfig only)

									PPPPaaaaggggeeee 1111
[ Back ]
 Similar pages
Name OS Title
eg IRIX gigabit ethernet driver
gem OpenBSD GEM Gigabit Ethernet interface
bcm Tru64 DEGXA Gigabit Ethernet interface
egcmd IRIX gigabit ethernet diagnostic tool
alt Tru64 DEGPA Gigabit Ethernet interface
xmphy OpenBSD XaQti XMAC-II Gigabit Ethernet PHY driver
if_gx FreeBSD Intel Pro/1000 gigabit ethernet driver
gx FreeBSD Intel Pro/1000 gigabit ethernet driver
em OpenBSD Intel(R) PRO/1000 Gigabit Ethernet driver
ti OpenBSD Alteon Networks Tigon I and II Gigabit Ethernet driver
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service