*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->HP-UX 11i man pages -> rpccp_show_mapping (1m)              


 show mapping(1m)                    OSF                    show mapping(1m)

 NAME    [Toc]    [Back]
      show mapping - Shows the elements of the either the local or a remote
      endpoint map

 SYNOPSIS    [Toc]    [Back]
      rpccp show mapping   [host-address]
      [-i if-id   [-v versions]]
      [-o object-uuid [ -o object-uuid...]]

 OPTIONS    [Toc]    [Back]
      -i        Defines an interface identifier to be shown (optional).
                Only one interface can be shown in a single operation.  If
                specified, only elements containing this interface
                identifier are shown.  The -i option can be qualified by the
                -v option. The value has the following form:


                The UUID is a hexadecimal string and the version numbers are
                decimal strings, for example:

                -i ec1eeb60-5943-11c9-a309-08002b102989,1.1

                Leading zeros in version numbers are ignored.

      -v        Indicates how a specified interface version is used
                (optional).  If it is used without the -i option, the -v
                option is ignored.  The possible combinations of versions
                for the -v option and their actions are described in the
                following table.

 Hewlett-Packard Company            - 1 OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96

 show mapping(1m)         Open Software Foundation          show mapping(1m)

                     |Versions   | Action                              |
                     |all        | The interface version is ignored.   |
                     |exact      | Both the major and minor versions   |
                     |           | must match the specified versions.  |
                     |compatible | The major version must match the    |
                     |           | specified version, and the minor    |
                     |           | version must be greater than or     |
                     |           | equal to the specified version.     |
                     |major_only | The major version must match the    |
                     |           | specified version; the minor        |
                     |           | version is ignored.                 |
                     |upto       | The major version must be less than |
                     |           | or equal to that specified.  If the |
                     |           | major versions are equal, the minor |
                     |           | version must be less than or equal  |
                     |           | to that specified.                  |

                If the -v option is absent, the command shows compatible
                version numbers.

      -o        Defines an object to be shown (optional).  Each show mapping
                command accepts up to 32 -o options.

                The UUID is a hexadecimal string, for example:

                -o 3c6b8f60-5945-11c9-a236-08002b102989

 ARGUMENTS    [Toc]    [Back]
                The host-address argument is a string binding that indicates
                where to find the target endpoint map.  When accessing the
                local endpoint map, you can specify which protocol sequence
                to use (optional); for example,


                When accessing a remote endpoint map, you must specify both
                a protocol sequence and a network address for the remote
                system (required); for example,


                An endpoint is unnecessary in local or remote host
                addresses, and the remove mapping command ignores any
                endpoint specified as part of a host address.

 Hewlett-Packard Company            - 2 OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96

 show mapping(1m)         Open Software Foundation          show mapping(1m)

 DESCRIPTION    [Toc]    [Back]
      The show mapping command shows elements of an endpoint map. Each
      element corresponds to an object UUID, interface identifier,
      annotation, and binding information. The binding information contains
      an RPC protocol sequence, a network address, and an endpoint within
      square brackets (rpc- prot-seq:network-addr[endpoint]).

      The endpoint map can be either the local endpoint map or the endpoint
      map of a specified remote host. If entered without a remote host
      address, the command accesses the local endpoint map. For the local
      endpoint map, a show mapping command without any options displays all
      the map elements. For a remote endpoint map, map elements are
      accessible only for protocol sequences that are supported on both your
      system and the remote system.

      The options list a selected subset of map elements. The - i option
      selects a specific interface, and the -v option qualifies the -i
      option. The -o object selects a specific object. You can use from 0 to
      32 -o options per command. The options work together to specify the
      subset of elements for the target protocol sequence(s).

 NOTES    [Toc]    [Back]
      Note that to ensure that you can remotely display all map elements
      from every remote endpoint map, run the RPC control program on a
      system that supports all of the protocol sequences available in your
      network environment.

      This command is replaced at Revision 1.1 by the dcecp command and may
      not be provided in future releases of DCE.

 EXAMPLES    [Toc]    [Back]
      The following commands start the control program and show the map
      elements in the local endpoint map that contain the specified
      interface identifier:

      pccp> show mapping -i ec1eeb60-5943-11c9-a309-08002b102989,1.1

      The following rpccp show mapping command operates from the system
      prompt.  The command accesses the endpoint map of the remote host
      specified by the host address (ncadg_ip_udp: and displays
      the one map element that contains both the specified interface
      identifier and the specified object UUID:

       rpccp show mapping  \
       -i ec1eeb60-5943-11c9-a309-08002b102989,1.1  \
       -o 30dbeea0-fb6c-11c9-8eea-08002b0f4528  \

 Hewlett-Packard Company            - 3 OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96

 show mapping(1m)         Open Software Foundation          show mapping(1m)

      Commands: remove mapping(1m), show server(1m)

 Hewlett-Packard Company            - 4 -OSF DCE 1.1/HP DCE 1.8 PHSS_26394-96
[ Back ]
 Similar pages
Name OS Title
rpccp_remove_mapping HP-UX Removes specified elements from the local endpoint map
dcecp_endpoint HP-UX A dcecp object that manages endpoint information in local RPC endpoint maps
rpccp_show_profile HP-UX Shows the elements of a profile
rwho Tru64 Shows which users are logged into hosts on the local network.
showmount Tru64 Shows remote NFS compatible mounts on a host
rpccp_add_mapping HP-UX Adds or replaces server address information in the local endpoint map
sharePrinters IRIX share local printers with remote hosts.
tt_host_file_netfile HP-UX map between local and canonical pathnames on a remote host
ftp Tru64 Transfers files between a local and a remote host
tt_host_netfile_file HP-UX map between canonical and local pathnames on a remote host
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service