NAME [Toc] [Back]
rmsf - remove a special (device) file
SYNOPSIS [Toc] [Back]
/sbin/rmsf [-a|-k] [-D directory] [-q|-v] special_file ...
/sbin/rmsf [-C class | -d driver] [-D directory] -H hw_path [-k]
DESCRIPTION [Toc] [Back]
The rmsf command removes one or more special files from the /dev
directory and potentially removes information about the associated
device or devices with H/W type "DEVICE" (see ioscan(1M)) from the
If no options are specified, rmsf removes only the special_files
specified on the command line. The -k option causes rmsf to remove
the definition of the device from the system without removing any
special files. The -a option causes rmsf to remove the device
definition, and all special files that map to it from the /dev
directory (or the directory specified with the -D option). By
default, rmsf only removes special_file as given on the command line,
however, when the -a option is used and special_file is an absolute
path name special_file will be removed even if it does not reside in
the /dev directory (or the directory specified with the -D option).
Note that if special_file belongs to a node for which H/W type is not
"DEVICE", the device definition will not be removed from the system
and the special_file will be removed if it is a leaf node.
If a -H hw_path is specified, special files are removed as follows:
+ If hw_path belongs to a node with H/W type "DEVICE," all
special files mapping to devices at that hardware path and the
system definition of those devices are removed.
+ If hw_path belongs to a node for which H/W type is not
"DEVICE," then, a special file is removed as follows:
+ If it is a leaf node, only special files for that node
will be removed.
+ If the node has children, then a warning message will be
issued and system definition of all the children devices
and their special files are removed.
The -C and -d options remove only those special files that are
associated with the given device driver or that belong to the given
device class, respectively. This is useful when there is more than
one type of special file mapped to a single hardware path.
Hewlett-Packard Company - 1 - HP-UX 11i Version 2: August 2003
If the -k option is specified, the definition of all devices at that
hardware path are removed from the system, again without removing any
Normally, rmsf displays a message as the special files are deleted for
each driver. The -q (quiet) option suppresses the deletion message.
The -v (verbose) option displays the deletion message and the name of
each special file as it is deleted.
Note that most drivers do not support the ability to be removed from
If the device being removed from the system uses a dynamically
assigned major number, that number will be freed up for future
Options [Toc] [Back]
rmsf recognizes the following options:
-a Remove the definition of the device from the
system along with all special files that refer to
the device. This option cannot be used with -k.
-C class Match devices that belong to a given device class,
class. Device classes can be listed with the
lsdev command (see lsdev(1M)). They are defined
in files in the directory /usr/conf/master.d.
This option cannot be used with -d.
-d driver Match devices that are controlled by the specified
device driver, driver. Device drivers can be
listed with the lsdev command (see lsdev(1M)).
They are defined in files in the directory
/usr/conf/master.d. This option cannot be used
-D directory Override the default device installation directory
/dev and remove the special files from directory
instead. directory must exist; otherwise, rmsf
displays an error message and exits. See
-H hw_path Match devices at a given hardware path, hw-path.
Hardware paths can be listed with the ioscan
command (see ioscan(1M)). A hardware path
specifies the addresses of the hardware components
leading to a device. It consists of a string of
numbers separated by periods (.), such as 52 (a
card), 52.3 (a target address), and 52.3.0 (a
device). If a hardware component is a bus
converter, the following period, if any, is
Hewlett-Packard Company - 2 - HP-UX 11i Version 2: August 2003
replaced by a slash (/) as in 2, 2/3, and 2/3.0.
-k Remove the definition of the device from the
system, but not any special files. This option
cannot be used with -a.
-q Quiet option. Normally, rmsf displays a message
as each driver is removed. This option suppresses
the driver message, but not error messages. See
the -v option.
-v Verbose option. In addition to the normal
processing message, display the name of each
special file as it is removed. See the -q option.
Print the names of the files as rmsf is removing
RETURN VALUE [Toc] [Back]
rmsf exits with one of the following values:
0 Successful completion, including warning diagnostics.
1 Failure. An error occurred.
DIAGNOSTICS [Toc] [Back]
Most of the diagnostic messages from rmsf are self-explanatory.
Listed below are some messages deserving further clarification.
Errors cause rmsf to halt immediately. Warnings allow the program to
Errors [Toc] [Back]
No such device in the system
No device in the system matched the options specified. Use
ioscan to list the devices in the system (see ioscan(1M)).
special_file is not a special file
The file is not associated with an I/O device.
Warnings [Toc] [Back]
WARNING: The specified hardware path is BUS_NEXUS/INTERFACE type.
This will remove all the devices connected to it.
The H/W type of the node specified by hw_path is
BUS_NEXUS/INTERFACE. All the devices under this path will be
Cannot remove driver at hw_path
The definition of the device located at hw_path and controlled by
driver cannot be removed from the kernel. That is driver does
Hewlett-Packard Company - 3 - HP-UX 11i Version 2: August 2003
not support the unbind function.
No device associated with special_file
The special file does not map to a device in the system; the file
is removed unless the -k option was specified.
EXAMPLES [Toc] [Back]
Remove the special file mux0 from the current directory:
Remove the system definition of the device associated with /dev/lp0
along with all special files that refer to the device:
rmsf -a /dev/lp0
Remove the system definitions for all devices associated with hardware
rmsf -k -H 52.6.0
WARNINGS [Toc] [Back]
Most commands and subsystems assume their device files are in /dev,
therefore the use of the -D option is discouraged.
Most device drivers do not support the unbind operation necessary to
remove the device from the system.
AUTHOR [Toc] [Back]
rmsf was developed by HP.
FILES [Toc] [Back]
SEE ALSO [Toc] [Back]
rm(1), insf(1M), ioscan(1M), lsdev(1M), lssf(1M), mksf(1M),
Hewlett-Packard Company - 4 - HP-UX 11i Version 2: August 2003 [ Back ]