*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> inode (5)              
Title
Content
Arch
Section
 

FS(5)

Contents


NAME    [Toc]    [Back]

     fs, inode -- format of file system volume

SYNOPSIS    [Toc]    [Back]

     #include <sys/param.h>
     #include <ufs/ffs/fs.h>

     #include <sys/types.h>
     #include <sys/lock.h>
     #include <ufs/ufs/quota.h>
     #include <ufs/ufs/inode.h>

DESCRIPTION    [Toc]    [Back]

     The files <fs.h> and <inode.h> declare several structures, defined variables
 and macros which are used to create and manage the underlying format
 of file system objects on random access devices (disks).

     The block size and number of blocks which comprise a file system are
     parameters of the file system.  Sectors beginning at BBLOCK and continuing
 for BBSIZE are used for a disklabel and for some hardware primary and
     secondary bootstrapping programs.

     The actual file system begins at sector SBLOCK with the super-block that
     is of size SBLOCKSIZE.  The following structure describes the super-block
     and is from the file <ufs/ffs/fs.h>:

     /*
      * Super block for an FFS filesystem.
      */
     struct fs {
	     int32_t  fs_firstfield;	/* historic filesystem linked list, */
	     int32_t  fs_unused_1;	/*     used for incore super blocks */
	     int32_t  fs_sblkno;	/* offset of super-block in filesys */
	     int32_t  fs_cblkno;	/* offset of cyl-block in filesys */
	     int32_t  fs_iblkno;	/* offset of inode-blocks in filesys */
	     int32_t  fs_dblkno;	/* offset of first data after cg */
	     int32_t  fs_old_cgoffset;	/* cylinder group offset in cylinder */
	     int32_t  fs_old_cgmask;	/* used to calc mod fs_ntrak */
	     int32_t  fs_old_time;	/* last time written */
	     int32_t  fs_old_size;	/* number of blocks in fs */
	     int32_t  fs_old_dsize;	/* number of data blocks in fs */
	     int32_t  fs_ncg;		/* number of cylinder groups */
	     int32_t  fs_bsize; 	/* size of basic blocks in fs */
	     int32_t  fs_fsize; 	/* size of frag blocks in fs */
	     int32_t  fs_frag;		/* number of frags in a block in fs */
     /* these are configuration parameters */
	     int32_t  fs_minfree;	/* minimum percentage of free blocks */
	     int32_t  fs_old_rotdelay;	/* num of ms for optimal next block */
	     int32_t  fs_old_rps;	/* disk revolutions per second */
     /* these fields can be computed from the others */
	     int32_t  fs_bmask; 	/* ``blkoff'' calc of blk offsets */
	     int32_t  fs_fmask; 	/* ``fragoff'' calc of frag offsets */
	     int32_t  fs_bshift;	/* ``lblkno'' calc of logical blkno */
	     int32_t  fs_fshift;	/* ``numfrags'' calc number of frags */
     /* these are configuration parameters */
	     int32_t  fs_maxcontig;	/* max number of contiguous blks */
	     int32_t  fs_maxbpg;	/* max number of blks per cyl group */
     /* these fields can be computed from the others */
	     int32_t  fs_fragshift;	/* block to frag shift */
	     int32_t  fs_fsbtodb;	/* fsbtodb and dbtofsb shift constant */
	     int32_t  fs_sbsize;	/* actual size of super block */
	     int32_t  fs_spare1[2];	/* old fs_csmask */
					/* old fs_csshift */
	     int32_t  fs_nindir;	/* value of NINDIR */
	     int32_t  fs_inopb; 	/* value of INOPB */
	     int32_t  fs_old_nspf;	/* value of NSPF */
     /* yet another configuration parameter */
	     int32_t  fs_optim; 	/* optimization preference, see below */
	     int32_t  fs_old_npsect;	/* # sectors/track including spares */
	     int32_t  fs_old_interleave; /* hardware sector interleave */
	     int32_t  fs_old_trackskew; /* sector 0 skew, per track */
	     int32_t  fs_id[2]; 	/* unique filesystem id */
     /* sizes determined by number of cylinder groups and their sizes */
	     int32_t  fs_old_csaddr;	/* blk addr of cyl grp summary area */
	     int32_t  fs_cssize;	/* size of cyl grp summary area */
	     int32_t  fs_cgsize;	/* cylinder group size */
	     int32_t  fs_spare2;	/* old fs_ntrak */
	     int32_t  fs_old_nsect;	/* sectors per track */
	     int32_t  fs_old_spc;	/* sectors per cylinder */
	     int32_t  fs_old_ncyl;	/* cylinders in filesystem */
	     int32_t  fs_old_cpg;	/* cylinders per group */
	     int32_t  fs_ipg;		/* inodes per group */
	     int32_t  fs_fpg;		/* blocks per group * fs_frag */
     /* this data must be re-computed after crashes */
	     struct  csum fs_old_cstotal; /* cylinder summary information */
     /* these fields are cleared at mount time */
	     int8_t   fs_fmod;		/* super block modified flag */
	     int8_t   fs_clean; 	/* filesystem is clean flag */
	     int8_t   fs_ronly; 	/* mounted read-only flag */
	     int8_t   fs_old_flags;	/* old FS_ flags */
	     u_char   fs_fsmnt[MAXMNTLEN]; /* name mounted on */
	     u_char   fs_volname[MAXVOLLEN]; /* volume name */
	     u_int64_t fs_swuid;	/* system-wide uid */
	     int32_t  fs_pad;		/* due to alignment of fs_swuid */
     /* these fields retain the current block allocation info */
	     int32_t  fs_cgrotor;	/* last cg searched */
	     void    *fs_ocsp[NOCSPTRS]; /* padding; was list of fs_cs buffers */
	     u_int8_t *fs_contigdirs;	/* # of contiguously allocated dirs */
	     struct  csum *fs_csp;	/* cg summary info buffer for fs_cs */
	     int32_t *fs_maxcluster;	/* max cluster in each cyl group */
	     u_int   *fs_active;	/* used by snapshots to track fs */
	     int32_t  fs_old_cpc;	/* cyl per cycle in postbl */
	     int32_t  fs_maxbsize;	/* maximum blocking factor permitted */
	     int64_t  fs_sparecon64[17]; /* old rotation block list head */
	     int64_t  fs_sblockloc;	/* byte offset of standard superblock */
	     struct  csum_total fs_cstotal;  /* cylinder summary information */
	     ufs_time_t fs_time;	/* last time written */
	     int64_t  fs_size;		/* number of blocks in fs */
	     int64_t  fs_dsize; 	/* number of data blocks in fs */
	     ufs2_daddr_t fs_csaddr;	/* blk addr of cyl grp summary area */
	     int64_t  fs_pendingblocks; /* blocks in process of being freed */
	     int32_t  fs_pendinginodes; /* inodes in process of being freed */
	     int32_t  fs_snapinum[FSMAXSNAP]; /* list of snapshot inode numbers */
	     int32_t  fs_avgfilesize;	/* expected average file size */
	     int32_t  fs_avgfpdir;	/* expected # of files per directory */
	     int32_t  fs_save_cgsize;	/* save real cg size to use fs_bsize */
	     int32_t  fs_sparecon32[26]; /* reserved for future constants */
	     int32_t  fs_flags; 	/* see FS_ flags below */
	     int32_t  fs_contigsumsize; /* size of cluster summary array */
	     int32_t  fs_maxsymlinklen; /* max length of an internal symlink */
	     int32_t  fs_old_inodefmt;	/* format of on-disk inodes */
	     u_int64_t fs_maxfilesize;	/* maximum representable file size */
	     int64_t  fs_qbmask;	/* ~fs_bmask for use with 64-bit size */
	     int64_t  fs_qfmask;	/* ~fs_fmask for use with 64-bit size */
	     int32_t  fs_state; 	/* validate fs_clean field */
	     int32_t  fs_old_postblformat; /* format of positional layout tables */
	     int32_t  fs_old_nrpos;	/* number of rotational positions */
	     int32_t  fs_spare5[2];	/* old fs_postbloff */
					/* old fs_rotbloff */
	     int32_t  fs_magic; 	/* magic number */
     };

     /*
      * Filesystem identification
      */
     #define FS_UFS1_MAGIC   0x011954	 /* UFS1 fast filesystem magic number */
     #define FS_UFS2_MAGIC   0x19540119  /* UFS2 fast filesystem magic number */
     #define FS_OKAY	     0x7c269d38  /* superblock checksum */
     #define FS_42INODEFMT   -1      /* 4.2BSD inode format */
     #define FS_44INODEFMT   2	     /* 4.4BSD inode format */

     /*
      * Preference for optimization.
      */
     #define FS_OPTTIME      0	     /* minimize allocation time */
     #define FS_OPTSPACE     1	     /* minimize disk fragmentation */

     Each disk drive contains some number of file systems.  A file system consists
 of a number of cylinder groups.  Each cylinder group has inodes and
     data.

     A file system is described by its super-block, which in turn describes
     the cylinder groups.  The super-block is critical data and is replicated
     in each cylinder group to protect against catastrophic loss.  This is
     done at file system creation time and the critical super-block data does
     not change, so the copies need not be referenced further unless disaster
     strikes.

     Addresses stored in inodes are capable of addressing fragments of
     `blocks'. File system blocks of at most size MAXBSIZE can be optionally
     broken into 2, 4, or 8 pieces, each of which is addressable; these pieces
     may be DEV_BSIZE, or some multiple of a DEV_BSIZE unit.

     Large files consist of exclusively large data blocks.  To avoid undue
     wasted disk space, the last data block of a small file is allocated as
     only as many fragments of a large block as are necessary.	The file system
 format retains only a single pointer to such a fragment, which is a
     piece of a single large block that has been divided.  The size of such a
     fragment is determinable from information in the inode, using the
     blksize(fs, ip, lbn) macro.

     The file system records space availability at the fragment level; to
     determine block availability, aligned fragments are examined.

     The root inode is the root of the file system.  Inode 0 can't be used for
     normal purposes and historically bad blocks were linked to inode 1, thus
     the root inode is 2 (inode 1 is no longer used for this purpose, however
     numerous dump tapes make this assumption, so we are stuck with it).

     The fs_minfree element gives the minimum acceptable percentage of file
     system blocks that may be free.  If the freelist drops below this level
     only the super-user may continue to allocate blocks.  The fs_minfree element
 may be set to 0 if no reserve of free blocks is deemed necessary,
     however severe performance degradations will be observed if the file system
 is run at greater than 90% full; thus the default value of fs_minfree
     is 10%.

     Empirically the best trade-off between block fragmentation and overall
     disk utilization at a loading of 90% comes with a fragmentation of 8,
     thus the default fragment size is an eighth of the block size.

     The element fs_optim specifies whether the file system should try to minimize
 the time spent allocating blocks, or if it should attempt to minimize
 the space fragmentation on the disk.	If the value of fs_minfree
     (see above) is less than 10%, then the file system defaults to optimizing
     for space to avoid running out of full sized blocks.  If the value of
     minfree is greater than or equal to 10%, fragmentation is unlikely to be
     problematical, and the file system defaults to optimizing for time.

     Cylinder group related limits: Each cylinder keeps track of the availability
 of blocks at different rotational positions, so that sequential
     blocks can be laid out with minimum rotational latency.  With the default
     of 8 distinguished rotational positions, the resolution of the summary
     information is 2ms for a typical 3600 rpm drive.

     The element fs_old_rotdelay gives the minimum number of milliseconds to
     initiate another disk transfer on the same cylinder.  It is used in
     determining the rotationally optimal layout for disk blocks within a
     file; the default value for fs_old_rotdelay is 2ms.

     Each file system has a statically allocated number of inodes.  An inode
     is allocated for each NBPI bytes of disk space.  The inode allocation
     strategy is extremely conservative.

     MINBSIZE is the smallest allowable block size.  With a MINBSIZE of 4096
     it is possible to create files of size 2^32 with only two levels of indirection.
  MINBSIZE must be big enough to hold a cylinder group block,
     thus changes to (struct cg) must keep its size within MINBSIZE.  Note
     that super-blocks are never more than size SBLOCKSIZE.

     The path name on which the file system is mounted is maintained in
     fs_fsmnt.	MAXMNTLEN defines the amount of space allocated in the superblock
 for this name.  The limit on the amount of summary information per
     file system is defined by MAXCSBUFS.  For a 4096 byte block size, it is
     currently parameterized for a maximum of two million cylinders.

     Per cylinder group information is summarized in blocks allocated from the
     first cylinder group's data blocks.  These blocks are read in from
     fs_csaddr (size fs_cssize) in addition to the super-block.

     N.B.: sizeof(struct csum) must be a power of two in order for the fs_cs()
     macro to work.

     The Super-block for a file system: The size of the rotational layout
     tables is limited by the fact that the super-block is of size SBLOCKSIZE.
     The size of these tables is inversely proportional to the block size of
     the file system.  The size of the tables is increased when sector sizes
     are not powers of two, as this increases the number of cylinders included
     before the rotational pattern repeats (fs_cpc).  The size of the rotational
 layout tables is derived from the number of bytes remaining in
     (struct fs).

     The number of blocks of data per cylinder group is limited because cylinder
 groups are at most one block.	The inode and free block tables must
     fit into a single block after deducting space for the cylinder group
     structure (struct cg).

     The Inode: The inode is the focus of all file activity in the UNIX file
     system.  There is a unique inode allocated for each active file, each
     current directory, each mounted-on file, text file, and the root.	An
     inode is `named' by its device/i-number pair.  For further information,
     see the include file <ufs/ufs/inode.h>.

HISTORY    [Toc]    [Back]

     A super-block structure named filsys appeared in Version 6 AT&T UNIX.
     The file system described in this manual appeared in 4.2BSD.


FreeBSD 5.2.1			April 19, 1994			 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
fs_vxfs HP-UX format of a VxFS file system volume
inode Tru64 Specifies the format of the file system volume
fs Tru64 Specifies the format of the file system volume
vxresize HP-UX change the length of a volume containing a file system
vxvmboot HP-UX prepare VERITAS Volume Manager volume as a root, boot, primary swap or dump volume
mh-format Tru64 Format file for the MH message system
satd IRIX system auditing file format.
inode IRIX format of an Extent File System inode
pf.os OpenBSD format of the operating system fingerprints file
inode_vxfs HP-UX format of a VxFS file system inode
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service