*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> route (4)              
Title
Content
Arch
Section
 

ROUTE(4)

Contents


NAME    [Toc]    [Back]

     route -- kernel packet forwarding database

SYNOPSIS    [Toc]    [Back]

     #include <sys/types.h>
     #include <sys/time.h>
     #include <sys/socket.h>
     #include <net/if.h>
     #include <net/route.h>

     int
     socket(PF_ROUTE, SOCK_RAW, int family);

DESCRIPTION    [Toc]    [Back]

     FreeBSD provides some packet routing facilities.  The kernel maintains a
     routing information database, which is used in selecting the appropriate
     network interface when transmitting packets.

     A user process (or possibly multiple co-operating processes) maintains
     this database by sending messages over a special kind of socket.  This
     supplants fixed size ioctl(2)'s used in earlier releases.	Routing table
     changes may only be carried out by the super user.

     The operating system may spontaneously emit routing messages in response
     to external events, such as receipt of a re-direct, or failure to locate
     a suitable route for a request.  The message types are described in
     greater detail below.

     Routing database entries come in two flavors: for a specific host, or for
     all hosts on a generic subnetwork (as specified by a bit mask and value
     under the mask.  The effect of wildcard or default route may be achieved
     by using a mask of all zeros, and there may be hierarchical routes.

     When the system is booted and addresses are assigned to the network
     interfaces, each protocol family installs a routing table entry for each
     interface when it is ready for traffic.  Normally the protocol specifies
     the route through each interface as a ``direct'' connection to the destination
 host or network.  If the route is direct, the transport layer of a
     protocol family usually requests the packet be sent to the same host
     specified in the packet.  Otherwise, the interface is requested to
     address the packet to the gateway listed in the routing entry (i.e. the
     packet is forwarded).

     When routing a packet, the kernel will attempt to find the most specific
     route matching the destination.  (If there are two different mask and
     value-under-the-mask pairs that match, the more specific is the one with
     more bits in the mask.  A route to a host is regarded as being supplied
     with a mask of as many ones as there are bits in the destination).  If no
     entry is found, the destination is declared to be unreachable, and a
     routing-miss message is generated if there are any listeners on the routing
 control socket described below.

     A wildcard routing entry is specified with a zero destination address
     value, and a mask of all zeroes.  Wildcard routes will be used when the
     system fails to find other routes matching the destination.  The combination
 of wildcard routes and routing redirects can provide an economical
     mechanism for routing traffic.

     One opens the channel for passing routing control messages by using the
     socket call shown in the synopsis above:

     The family parameter may be AF_UNSPEC which will provide routing information
 for all address families, or can be restricted to a specific address
     family by specifying which one is desired.  There can be more than one
     routing socket open per system.

     Messages are formed by a header followed by a small number of sockaddrs
     (now variable length particularly in the ISO case), interpreted by position,
 and delimited by the new length entry in the sockaddr.  An example
     of a message with four addresses might be an ISO redirect: Destination,
     Netmask, Gateway, and Author of the redirect.  The interpretation of
     which address are present is given by a bit mask within the header, and
     the sequence is least significant to most significant bit within the vector.


     Any messages sent to the kernel are returned, and copies are sent to all
     interested listeners.  The kernel will provide the process ID for the
     sender, and the sender may use an additional sequence field to distinguish
 between outstanding messages.  However, message replies may be lost
     when kernel buffers are exhausted.

     The kernel may reject certain messages, and will indicate this by filling
     in the rtm_errno field.  The routing code returns EEXIST if requested to
     duplicate an existing entry, ESRCH if requested to delete a non-existent
     entry, or ENOBUFS if insufficient resources were available to install a
     new route.  In the current implementation, all routing processes run
     locally, and the values for rtm_errno are available through the normal
     errno mechanism, even if the routing reply message is lost.

     A process may avoid the expense of reading replies to its own messages by
     issuing a setsockopt(2) call indicating that the SO_USELOOPBACK option at
     the SOL_SOCKET level is to be turned off.	A process may ignore all messages
 from the routing socket by doing a shutdown(2) system call for further
 input.

     If a route is in use when it is deleted, the routing entry will be marked
     down and removed from the routing table, but the resources associated
     with it will not be reclaimed until all references to it are released.
     User processes can obtain information about the routing entry to a specific
 destination by using a RTM_GET message, or by calling sysctl(3).

     Messages include:

     #define RTM_ADD	     0x1    /* Add Route */
     #define RTM_DELETE      0x2    /* Delete Route */
     #define RTM_CHANGE      0x3    /* Change Metrics, Flags, or Gateway */
     #define RTM_GET	     0x4    /* Report Information */
     #define RTM_LOSING      0x5    /* Kernel Suspects Partitioning */
     #define RTM_REDIRECT    0x6    /* Told to use different route */
     #define RTM_MISS	     0x7    /* Lookup failed on this address */
     #define RTM_LOCK	     0x8    /* fix specified metrics */
     #define RTM_RESOLVE     0xb    /* request to resolve dst to LL addr */
     #define RTM_NEWADDR     0xc    /* address being added to iface */
     #define RTM_DELADDR     0xd    /* address being removed from iface */
     #define RTM_IFINFO      0xe    /* iface going up/down etc. */
     #define RTM_NEWMADDR    0xf    /* mcast group membership being added to if */
     #define RTM_DELMADDR    0x10   /* mcast group membership being deleted */
     #define RTM_IFANNOUNCE  0x11   /* iface arrival/departure */

     A message header consists of one of the following:

     struct rt_msghdr {
	 u_short rtm_msglen;	     /* to skip over non-understood messages */
	 u_char  rtm_version;	     /* future binary compatibility */
	 u_char  rtm_type;	     /* message type */
	 u_short rtm_index;	     /* index for associated ifp */
	 int	 rtm_flags;	     /* flags, incl. kern & message, e.g. DONE */
	 int	 rtm_addrs;	     /* bitmask identifying sockaddrs in msg */
	 pid_t	 rtm_pid;	     /* identify sender */
	 int	 rtm_seq;	     /* for sender to identify action */
	 int	 rtm_errno;	     /* why failed */
	 int	 rtm_use;	     /* from rtentry */
	 u_long  rtm_inits;	     /* which metrics we are initializing */
	 struct  rt_metrics rtm_rmx; /* metrics themselves */
     };

     struct if_msghdr {
	 u_short ifm_msglen;	     /* to skip over non-understood messages */
	 u_char  ifm_version;	     /* future binary compatibility */
	 u_char  ifm_type;	     /* message type */
	 int	 ifm_addrs;	     /* like rtm_addrs */
	 int	 ifm_flags;	     /* value of if_flags */
	 u_short ifm_index;	     /* index for associated ifp */
	 struct  if_data ifm_data;   /* statistics and other data about if */
     };

     struct ifa_msghdr {
	 u_short ifam_msglen;	     /* to skip over non-understood messages */
	 u_char  ifam_version;	     /* future binary compatibility */
	 u_char  ifam_type;	     /* message type */
	 int	 ifam_addrs;	     /* like rtm_addrs */
	 int	 ifam_flags;	     /* value of ifa_flags */
	 u_short ifam_index;	     /* index for associated ifp */
	 int	 ifam_metric;	     /* value of ifa_metric */
     };

     struct ifma_msghdr {
	 u_short ifmam_msglen;	     /* to skip over non-understood messages */
	 u_char  ifmam_version;      /* future binary compatibility */
	 u_char  ifmam_type;	     /* message type */
	 int	 ifmam_addrs;	     /* like rtm_addrs */
	 int	 ifmam_flags;	     /* value of ifa_flags */
	 u_short ifmam_index;	     /* index for associated ifp */
     };

     struct if_announcemsghdr {
	     u_short ifan_msglen;    /* to skip over non-understood messages */
	     u_char  ifan_version;   /* future binary compatibility */
	     u_char  ifan_type;      /* message type */
	     u_short ifan_index;     /* index for associated ifp */
	     char    ifan_name[IFNAMSIZ]; /* if name, e.g. "en0" */
	     u_short ifan_what;      /* what type of announcement */
     };

     The RTM_IFINFO message uses a if_msghdr header, the RTM_NEWADDR and
     RTM_DELADDR messages use a ifa_msghdr header, the RTM_NEWMADDR and
     RTM_DELMADDR messages use a ifma_msghdr header, the RTM_IFANNOUNCE message
 uses a if_announcemsghdr header, and all other messages use the
     rt_msghdr header.

     The ``struct rt_metrics'' and the flag bits are as defined in rtentry(9).

     Specifiers for metric values in rmx_locks and rtm_inits are:

     #define RTV_MTU	   0x1	  /* init or lock _mtu */
     #define RTV_HOPCOUNT  0x2	  /* init or lock _hopcount */
     #define RTV_EXPIRE    0x4	  /* init or lock _expire */
     #define RTV_RPIPE	   0x8	  /* init or lock _recvpipe */
     #define RTV_SPIPE	   0x10   /* init or lock _sendpipe */
     #define RTV_SSTHRESH  0x20   /* init or lock _ssthresh */
     #define RTV_RTT	   0x40   /* init or lock _rtt */
     #define RTV_RTTVAR    0x80   /* init or lock _rttvar */

     Specifiers for which addresses are present in the messages are:

     #define RTA_DST	   0x1	  /* destination sockaddr present */
     #define RTA_GATEWAY   0x2	  /* gateway sockaddr present */
     #define RTA_NETMASK   0x4	  /* netmask sockaddr present */
     #define RTA_GENMASK   0x8	  /* cloning mask sockaddr present */
     #define RTA_IFP	   0x10   /* interface name sockaddr present */
     #define RTA_IFA	   0x20   /* interface addr sockaddr present */
     #define RTA_AUTHOR    0x40   /* sockaddr for author of redirect */
     #define RTA_BRD	   0x80   /* for NEWADDR, broadcast or p-p dest addr */

SEE ALSO    [Toc]    [Back]

      
      
     sysctl(3), route(8), rtentry(9)

HISTORY    [Toc]    [Back]

     A PF_ROUTE protocol family first appeared in 4.3BSD-Reno.


FreeBSD 5.2.1		       January 18, 2002 		 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
divert FreeBSD kernel packet diversion mechanism
ipf FreeBSD packet filtering kernel interface
ipf FreeBSD alters packet filtering lists for IP packet input and output
configipforwardstate IRIX turn IP forwarding on or off
forward FreeBSD mail forwarding instructions
ioforw_timeout HP-UX enable timeout in I/O forwarding
forward OpenBSD e-mail forwarding information file
kvm_mkdb OpenBSD create kernel database
pf OpenBSD packet filter
ipl FreeBSD IP packet log device
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service