*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> swprintf (3)              
Title
Content
Arch
Section
 

WPRINTF(3)

Contents


NAME    [Toc]    [Back]

     wprintf, fwprintf, swprintf, vwprintf, vfwprintf, vswprintf -- formatted
     wide character output conversion

LIBRARY    [Toc]    [Back]

     Standard C Library (libc, -lc)

SYNOPSIS    [Toc]    [Back]

     #include <stdio.h>
     #include <wchar.h>

     int
     fwprintf(FILE * restrict stream, const wchar_t * restrict format, ...);

     int
     swprintf(wchar_t * restrict ws, size_t n,
	 const wchar_t * restrict format, ...);

     int
     wprintf(const wchar_t * restrict format, ...);

     #include <stdarg.h>

     int
     vfwprintf(FILE * restrict stream, const wchar_t * restrict, va_list ap);

     int
     vswprintf(wchar_t * restrict ws, size_t n,
	 const wchar_t *restrict format, va_list ap);

     int
     vwprintf(const wchar_t * restrict format, va_list ap);

DESCRIPTION    [Toc]    [Back]

     The wprintf() family of functions produces output according to a format
     as described below.  The wprintf() and vwprintf() functions write output
     to stdout, the standard output stream; fwprintf() and vfwprintf() write
     output to the given output stream; swprintf() and vswprintf() write to
     the wide character string ws.

     These functions write the output under the control of a format string
     that specifies how subsequent arguments (or arguments accessed via the
     variable-length argument facilities of stdarg(3)) are converted for output.


     These functions return the number of characters printed (not including
     the trailing `\0' used to end output to strings).

     The swprintf() and vswprintf() functions will fail if n or more wide
     characters were requested to be written,

     The format string is composed of zero or more directives: ordinary characters
 (not %), which are copied unchanged to the output stream; and conversion
 specifications, each of which results in fetching zero or more
     subsequent arguments.  Each conversion specification is introduced by the
     % character.  The arguments must correspond properly (after type promotion)
 with the conversion specifier.  After the %, the following appear
     in sequence:

     +o	 An optional field, consisting of a decimal digit string followed by a
	 $, specifying the next argument to access.  If this field is not provided,
 the argument following the last argument accessed will be
	 used.	Arguments are numbered starting at 1.  If unaccessed arguments
	 in the format string are interspersed with ones that are accessed the
	 results will be indeterminate.

     +o	 Zero or more of the following flags:

	 `#'	      The value should be converted to an ``alternate form''.
		      For c, d, i, n, p, s, and u conversions, this option has
		      no effect.  For o conversions, the precision of the number
 is increased to force the first character of the
		      output string to a zero (except if a zero value is
		      printed with an explicit precision of zero).  For x and
		      X conversions, a non-zero result has the string `0x' (or
		      `0X' for X conversions) prepended to it.	For a, A, e,
		      E, f, F, g, and G conversions, the result will always
		      contain a decimal point, even if no digits follow it
		      (normally, a decimal point appears in the results of
		      those conversions only if a digit follows).  For g and G
		      conversions, trailing zeros are not removed from the
		      result as they would otherwise be.

	 `0' (zero)   Zero padding.  For all conversions except n, the converted
 value is padded on the left with zeros rather
		      than blanks.  If a precision is given with a numeric
		      conversion (d, i, o, u, i, x, and X), the 0 flag is
		      ignored.

	 `-'	      A negative field width flag; the converted value is to
		      be left adjusted on the field boundary.  Except for n
		      conversions, the converted value is padded on the right
		      with blanks, rather than on the left with blanks or
		      zeros.  A - overrides a 0 if both are given.

	 ` ' (space)  A blank should be left before a positive number produced
		      by a signed conversion (a, A, d, e, E, f, F, g, G, or
		      i).

	 `+'	      A sign must always be placed before a number produced by
		      a signed conversion.  A + overrides a space if both are
		      used.

	 `''	      Decimal conversions (d, u, or i) or the integral portion
		      of a floating point conversion (f or F) should be
		      grouped and separated by thousands using the non-monetary
 separator returned by localeconv(3).

     +o	 An optional decimal digit string specifying a minimum field width.
	 If the converted value has fewer characters than the field width, it
	 will be padded with spaces on the left (or right, if the left-adjustment
 flag has been given) to fill out the field width.

     +o	 An optional precision, in the form of a period . followed by an
	 optional digit string.  If the digit string is omitted, the precision
	 is taken as zero.  This gives the minimum number of digits to appear
	 for d, i, o, u, x, and X conversions, the number of digits to appear
	 after the decimal-point for a, A, e, E, f, and F conversions, the
	 maximum number of significant digits for g and G conversions, or the
	 maximum number of characters to be printed from a string for s conversions.


     +o	 An optional length modifier, that specifies the size of the argument.
	 The following length modifiers are valid for the d, i, n, o, u, x, or
	 X conversion:

	 Modifier	   d, i 	  o, u, x, X		n
	 hh		   signed char	  unsigned char 	signed char *
	 h		   short	  unsigned short	short *
	 l (ell)	   long 	  unsigned long 	long *
	 ll (ell ell)	   long long	  unsigned long long	long long *
	 j		   intmax_t	  uintmax_t		intmax_t *
	 t		   ptrdiff_t	  (see note)		ptrdiff_t *
	 z		   (see note)	  size_t		(see note)
	 q (deprecated)    quad_t	  u_quad_t		quad_t *

	 Note: the t modifier, when applied to a o, u, x, or X conversion,
	 indicates that the argument is of an unsigned type equivalent in size
	 to a ptrdiff_t.  The z modifier, when applied to a d or i conversion,
	 indicates that the argument is of a signed type equivalent in size to
	 a size_t.  Similarly, when applied to an n conversion, it indicates
	 that the argument is a pointer to a signed type equivalent in size to
	 a size_t.

	 The following length modifier is valid for the a, A, e, E, f, F, g,
	 or G conversion:

	 Modifier    a, A, e, E, f, F, g, G
	 L	     long double

	 The following length modifier is valid for the c or s conversion:

	 Modifier    c	       s
	 l (ell)     wint_t    wchar_t *

     +o	 A character that specifies the type of conversion to be applied.

     A field width or precision, or both, may be indicated by an asterisk `*'
     or an asterisk followed by one or more decimal digits and a `$' instead
     of a digit string.  In this case, an int argument supplies the field
     width or precision.  A negative field width is treated as a left adjustment
 flag followed by a positive field width; a negative precision is
     treated as though it were missing.  If a single format directive mixes
     positional (nn$) and non-positional arguments, the results are undefined.

     The conversion specifiers and their meanings are:

     diouxX  The int (or appropriate variant) argument is converted to signed
	     decimal (d and i), unsigned octal (o), unsigned decimal (u), or
	     unsigned hexadecimal (x and X) notation.  The letters ``abcdef''
	     are used for x conversions; the letters ``ABCDEF'' are used for X
	     conversions.  The precision, if any, gives the minimum number of
	     digits that must appear; if the converted value requires fewer
	     digits, it is padded on the left with zeros.

     DOU     The long int argument is converted to signed decimal, unsigned
	     octal, or unsigned decimal, as if the format had been ld, lo, or
	     lu respectively.  These conversion characters are deprecated, and
	     will eventually disappear.

     eE      The double argument is rounded and converted in the style
	     [-]d.ddde+-dd where there is one digit before the decimal-point
	     character and the number of digits after it is equal to the precision;
 if the precision is missing, it is taken as 6; if the
	     precision is zero, no decimal-point character appears.  An E conversion
 uses the letter `E' (rather than `e') to introduce the
	     exponent.	The exponent always contains at least two digits; if
	     the value is zero, the exponent is 00.

	     For a, A, e, E, f, F, g, and G conversions, positive and negative
	     infinity are represented as inf and -inf respectively when using
	     the lowercase conversion character, and INF and -INF respectively
	     when using the uppercase conversion character.  Similarly, NaN is
	     represented as nan when using the lowercase conversion, and NAN
	     when using the uppercase conversion.

     fF      The double argument is rounded and converted to decimal notation
	     in the style [-]ddd.ddd, where the number of digits after the
	     decimal-point character is equal to the precision specification.
	     If the precision is missing, it is taken as 6; if the precision
	     is explicitly zero, no decimal-point character appears.  If a
	     decimal point appears, at least one digit appears before it.

     gG      The double argument is converted in style f or e (or F or E for G
	     conversions).  The precision specifies the number of significant
	     digits.  If the precision is missing, 6 digits are given; if the
	     precision is zero, it is treated as 1.  Style e is used if the
	     exponent from its conversion is less than -4 or greater than or
	     equal to the precision.  Trailing zeros are removed from the
	     fractional part of the result; a decimal point appears only if it
	     is followed by at least one digit.

     aA      The double argument is converted to hexadecimal notation in the
	     style [-]0xh.hhhp[+-]d, where the number of digits after the
	     hexadecimal-point character is equal to the precision specification.
  If the precision is missing, it is taken as enough to
	     exactly represent the floating-point number; if the precision is
	     explicitly zero, no hexadecimal-point character appears.  This is
	     an exact conversion of the mantissa+exponent internal floating
	     point representation; the [-]0xh.hhh portion represents exactly
	     the mantissa; only denormalized mantissas have a zero value to
	     the left of the hexadecimal point.  The p is a literal character
	     `p'; the exponent is preceded by a positive or negative sign and
	     is represented in decimal, using only enough characters to represent
 the exponent.  The A conversion uses the prefix ``0X''
	     (rather than ``0x''), the letters ``ABCDEF'' (rather than
	     ``abcdef'') to represent the hex digits, and the letter `P'
	     (rather than `p') to separate the mantissa and exponent.

     C	     Treated as c with the l (ell) modifier.

     c	     The int argument is converted to an unsigned char, then to a
	     wchar_t as if by btowc(3), and the resulting character is written.


	     If the l (ell) modifier is used, the wint_t argument is converted
	     to a wchar_t and written.

     S	     Treated as s with the l (ell) modifier.

     s	     The char * argument is expected to be a pointer to an array of
	     character type (pointer to a string) containing a multibyte
	     sequence.	Characters from the array are converted to wide characters
 and written up to (but not including) a terminating NUL
	     character; if a precision is specified, no more than the number
	     specified are written.  If a precision is given, no null character
 need be present; if the precision is not specified, or is
	     greater than the size of the array, the array must contain a terminating
 NUL character.

	     If the l (ell) modifier is used, the wchar_t * argument is
	     expected to be a pointer to an array of wide characters (pointer
	     to a wide string).  Each wide character in the string is written.
	     Wide characters from the array are written up to (but not including)
 a terminating wide NUL character; if a precision is specified,
 no more than the number specified are written (including
	     shift sequences).	If a precision is given, no null character
	     need be present; if the precision is not specified, or is greater
	     than the number of characters in the string, the array must contain
 a terminating wide NUL character.

     p	     The void * pointer argument is printed in hexadecimal (as if by
	     `%#x' or `%#lx').

     n	     The number of characters written so far is stored into the integer
 indicated by the int * (or variant) pointer argument.	No
	     argument is converted.

     %	     A `%' is written.	No argument is converted.  The complete conversion
 specification is `%%'.

     The decimal point character is defined in the program's locale (category
     LC_NUMERIC).

     In no case does a non-existent or small field width cause truncation of a
     numeric field; if the result of a conversion is wider than the field
     width, the field is expanded to contain the conversion result.

SECURITY CONSIDERATIONS    [Toc]    [Back]

     Refer to printf(3).

SEE ALSO    [Toc]    [Back]

      
      
     btowc(3), fputws(3), printf(3), putwc(3), setlocale(3), wcsrtombs(3),
     wscanf(3)

STANDARDS    [Toc]    [Back]

     Subject to the caveats noted in the BUGS section of printf(3), the
     wprintf(), fwprintf(), swprintf(), vwprintf(), vfwprintf() and
     vswprintf() functions conform to ISO/IEC 9899:1999 (``ISO C99'').


FreeBSD 5.2.1			 July 5, 2003			 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
sprintf OpenBSD formatted output conversion
vfprintf OpenBSD formatted output conversion
tprintf FreeBSD formatted output conversion
vprintf OpenBSD formatted output conversion
uprintf FreeBSD formatted output conversion
vsnprintf OpenBSD formatted output conversion
vsprintf OpenBSD formatted output conversion
asprintf OpenBSD formatted output conversion
printf NetBSD formatted output conversion
vprintf FreeBSD formatted output conversion
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service