*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->Linux man pages -> console (4)              



NAME    [Toc]    [Back]

       console - console terminal and virtual consoles

DESCRIPTION    [Toc]    [Back]

       A  Linux  system  has up to 63 virtual consoles (character devices with
       major number 4 and minor number 1 to 63), usually called /dev/ttyn with
       1 <= n <= 63.  The current console is also addressed by /dev/console or
       /dev/tty0, the character device with major number 4 and minor number 0.
       The  device  files /dev/* are usually created using the script MAKEDEV,
       or using mknod(1), usually with mode 0622 and owner root.tty.

       Before kernel version 1.1.54 the number of virtual  consoles  was  compiled
  into  the  kernel (in tty.h: #define NR_CONSOLES 8) and could be
       changed by editing and recompiling.  Since version 1.1.54 virtual  consoles
 are created on the fly, as soon as they are needed.

       Common  ways  to start a process on a console are: (a) tell init(8) (in
       inittab(5)) to start a getty(8) on the  console;  (b)  ask  open(1)  to
       start  a  process  on the console; (c) start X - it will find the first
       unused console, and display its	output	there.	 (There  is  also  the
       ancient doshell(8).)

       Common  ways  to  switch consoles are: (a) use Alt+Fn or Ctrl+Alt+Fn to
       switch to console n; AltGr+Fn might bring you to console n+12 [here Alt
       and  AltGr refer to the left and right Alt keys, respectively]; (b) use
       Alt+RightArrow or Alt+LeftArrow to cycle through  the  presently  allocated
  consoles; (c) use the program chvt(1).  (The key mapping is user
       settable, see loadkeys(1); the above  mentioned	key  combinations  are
       according to the default settings.)

       The command deallocvt(1) (formerly disalloc) will free the memory taken
       by the screen buffers for consoles that no longer have  any  associated

PROPERTIES    [Toc]    [Back]

       Consoles carry a lot of state. I hope to document that some other time.
       The most important fact is that the consoles simulate vt100  terminals.
       In  particular, a console is reset to the initial state by printing the
       two characters ESC c.  All  escape  sequences  can  be  found  in  con-

FILES    [Toc]    [Back]


SEE ALSO    [Toc]    [Back]

       charsets(4),   console_codes(4),  console_ioctl(4),  mknod(1),  tty(4),
       ttys(4),  getty(8),  init(8),  chvt(1),	open(1),  deallocvt(1),  load-
       keys(1), resizecons(8), consolechars(8), mapscrn(8).

Console tools			  28 Oct 1997			    CONSOLE(4)
[ Back ]
 Similar pages
Name OS Title
console_ioctl Linux ioctl's for console terminal and virtual consoles
console_ioctls Linux 0console ioctl's- ioctl's for console terminal and virtual consoles
vcs Linux virtual console memory
vt FreeBSD VT220 virtual screen system console
pcvt FreeBSD VT220 virtual screen system console
syslog Tru64 enables and disables printing to the console device, /dev/console, by the syslogd daemon.
openvt Linux start a program on a new virtual terminal (VT).
chvt Linux change foreground virtual terminal
vm_map FreeBSD virtual address space portion of virtual memory subsystem
termios Linux get and set terminal attributes, line control, get and set baud rate, get and set terminal foregroun...
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service