*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->HP-UX 11i man pages              
 nsquery(1) -- query the Name Service Switch backend libraries
    nsquery is used to find the Name Service that returned the response to a gethostbyname(), gethostbyaddr(), getpwnam(), getpwuid(), getgrnam(), or getgrgid() function call. This application is Name Service Switch aware and follows the lookup policies in /etc/nsswitch.conf. The lookup types supported are: hosts Used to resolve host name or IP Address lookups. passwd Used to resolve user name or UID ...
 nsupdate(1) -- Dynamic DNS update utility
    nsupdate is used to submit Dynamic DNS Update requests as defined in RFC2136 to a name server. This allows resource records to be added or removed from a zone without manually editing the zone file. A single update request can contain requests to add or remove more than one resource record. Zones that are under dynamic control via nsupdate or a DHCP server should not be edited by hand. Manual edit...
 ntpdate(1m) -- set the date and time via NTP
    ntpdate sets the local date and time by polling those Network Time Protocol (NTP) server(s) given as the server arguments to determine the correct time. It must be run as root on the local host. A number of samples are obtained from each of the servers specified and a subset of the NTP clock filter and selection algorithms are applied to select the best of these. Note that the accuracy and reliabi...
 ntpq(1m) -- standard Network Time Protocol query program
    ntpq is used to query NTP servers, that implement the recommended NTP mode 6 control message format about current state and to request changes in that state. The program may be run either in interactive mode or controlled mode using command line arguments. Requests to read and write arbitrary variables can be assembled, with raw and pretty-printed output options available. ntpq can also obtain and...
 nulladm(1m) -- shell procedures for accounting
    chargefee Can be invoked to charge a number of units to login- name. A record is written to /var/adm/fee, to be merged with other accounting records during the night. ckpacct Should be initiated via cron(1M). It periodically checks the size of /var/adm/pacct. If the size exceeds blocks, 1000 by default, turnacct is invoked with argument switch. If the number of free disk blocks in the /var file sy...
 ocd(1m) -- outbound connection daemon used by DDFA software
    The Outbound Connection Daemon (ocd) is part of the Data Communications and Terminal Controller (DTC) Device File Access (DDFA) software. It manages the connection and data transfer to the remote terminal server port. It can be spawned from the Dedicated Port Parser (dpp) or run directly from the shell. For performance reasons, ocd does not have a debug mode. However, a version called ocdebug with...
 ocdebug(1m) -- outbound connection daemon debug utility used by DDFA software
    The ocdebug daemon is the debugging version of the Outbound Connection Daemon (ocd). ocd is part of the Data Communications and Terminal Controller (DTC) Device File Access (DDFA) software. It manages the connection and data transfer to the remote terminal server port. See ddfa(7) for more information on how to configure the DDFA software and for an explanation of how it works. Debugging may be to...
 od(1) -- octal and hexadecimal dump
    od and xd concatenate one or more input files and write their contents to standard output in a user-specified format. If file is not specified, the standard input is used.
 odump(1) -- dump information contained in SOM object files
    odump takes one or more 32-bit native code files (object files, shared and archive libraries, executables) and dumps information about them. Note: odump skips non-SOM input files and issues a warning. $ odump -all /usr/lib/pa20_64/libc.sl File is not a SOM, skipping: /usr/lib/pa20_64/libc.sl.
 olrad(1m) -- command for online addition/replacement of PCI IO cards
    The olrad command provides the ability to perform on-line addition and replacement of I/O cards. olrad performs critical resource analysis of the system before performing any OLA/R operation. This is to ensure that the system is not left in an inconsistent state after a PCI card is added/replaced. Only users with root privileges may use this command.
 on(1) -- execute command on remote host with environment similar to local
    on executes a command on a remote host, using an environment similar to that of the invoking user where: host specifies the name of the host on which to execute the command. command specifies the command to execute on host If command is not specified, on starts a shell on host. argument ... is a list of arguments for command. The user's environment variables are copied to the remote host, and the...
 opx25(1m) -- execute HALGOL programs
    The uucp commands, including opx25, are targeted for removal from HPUX; see the WARNINGS below. HALGOL is a simple language for communicating with devices such as modems and X.25 PADs. It has simple statements similar to send xxx and expect yyy that are described below. Options: opx25 recognizes the following options: -f script Causes opx25 to read script as the input program. If -f is not specifi...
 osdd(1) -- print documents formatted with the mm macros
    mm can be used to format and print documents using nroff and the mm text-formatting macro package (see nroff(1)). It has options to specify preprocessing by tbl and/or neqn, (see tbl(1) and neqn(1)), and postprocessing by various terminal-oriented output filters. The proper pipelines and the required arguments and flags for nroff and mm are generated, depending on the options selected. osdd is equ...
 ospf_monitor(1m) -- monitor OSPF (Open Shortest Path First protocol) gateways
    Use the ospf_monitor command to query OSPF routers. The ospf_monitor command operates in interactive mode. It allows the user to query the various OSPF routers to provide detailed information on IO statistics, error logs, link-state data bases, AS external data bases, the OSPF routing table, configured OSPF interfaces, and OSPF neighbors. mon_db_file is the complete pathname of a database composed...
 owners(1m) -- list owners of outgoing network connections
    owners displays a list of established network connections which originate on this system, and indicates the owners of each connection using the identd running on this system.
<<  [Prev]  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  
49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  [Next]  >>
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service