stge - Sundance/Tamarack TC9021 Gigabit Ethernet driver
stge* at pci? dev ? function ?
Configuration of PHYs or Ten-bit interfaces may also be necessary. See
The stge device driver supports the Sundance/Tamarack TC9021
The Sundance/Tamarack TC9021 is found on the D-Link
DGE-550T, and the
Antares Microsystems Gigabit Ethernet board. It uses an external PHY or
an external 10-bit interface.
arp(4), eephy(4), ifmedia(4), intro(4), mii(4), netintro(4),
vlan(4), hostname.if(5), ifconfig(8)
The stge driver first appeared in OpenBSD 3.1.
The stge driver was written by Jason R. Thorpe <firstname.lastname@example.org>.
The stge driver does not support the VLAN tag insertion/removal feature
of the TC9021 chip. This is primarily because the TC9021's
VLAN do not
have a useful programming interface.
The stge driver does not yet support jumbo Ethernet frames.
OpenBSD 3.6 July 24, 2001
[ Back ]