*nix Documentation Project
·  Home
 +   man pages
·  Linux HOWTOs
·  FreeBSD Tips
·  *niX Forums

  man pages->FreeBSD man pages -> sliplogin (8)              



NAME    [Toc]    [Back]

     sliplogin -- attach a serial line network interface

SYNOPSIS    [Toc]    [Back]

     sliplogin [loginname [device]]

DESCRIPTION    [Toc]    [Back]

     The sliplogin utility is used to turn the terminal line on standard input
     (or device) into a Serial Line IP (SLIP) link to a remote host.  To do
     this, the program searches the file /etc/sliphome/slip.hosts for an entry
     matching loginname (which defaults to the current login name if omitted).
     If a matching entry is found, the line is configured appropriately for
     slip (8-bit transparent i/o) and converted to SLIP line discipline using
     the optional line discipline parameters.

     The optional line discipline parameters consist of one or more of the
     following; `normal', `compress', `noicmp', or `autocomp' which correspond
     respectively to `use normal line discipline' (no header compression),
     `enable VJ header compression', `throw away ICMP packets', and `auto
     enable VJ header compression' (only if the remote end of the link also
     supports it).

     Then a shell script is invoked to initialize the slip interface with the
     appropriate local and remote IP address, netmask, etc.

     The usual initialization script is /etc/sliphome/slip.login but, if particular
 hosts need special initialization, the file
     /etc/sliphome/slip.login.loginname will be executed instead if it exists.
     The script is invoked with the parameters

     slipunit  The unit number of the slip interface assigned to this line.
	       E.g., 0 for sl0.

     speed     The speed of the line.

     args      The arguments from the /etc/sliphome/slip.hosts entry, in order
	       starting with loginname.

     Only the super-user may attach a network interface.  The interface is
     automatically detached when the other end hangs up or the sliplogin
     process dies.  If the kernel slip module has been configured for it, all
     routes through that interface will also disappear at the same time.  If
     there is other processing a site would like done on hangup, the file
     /etc/sliphome/slip.logout or /etc/sliphome/slip.logout.loginname is executed
 if it exists.  It is given the same arguments as the login script.

   Format of /etc/sliphome/slip.hosts
     Comments (lines starting with a `#') and blank lines (or started with
     space) are ignored.  Other lines must start with a loginname but the
     remaining arguments can be whatever is appropriate for the slip.login
     file that will be executed for that name.	Arguments are separated by
     white space and follow normal sh(1) quoting conventions (however,
     loginname cannot be quoted).  Usually, lines have the form

	   loginname local-address remote-address netmask opt-args

     where local-address and remote-address are the IP host names or addresses
     of the local and remote ends of the slip line and netmask is the appropriate
 IP netmask.  These arguments are passed directly to ifconfig(8).
     Opt-args are optional arguments used to configure the line.

FreeBSD Additions    [Toc]    [Back]

     An additional SLIP configuration file (if present) is
     /etc/sliphome/slip.slparms.  If particular hosts need different configurations,
 the file /etc/sliphome/slip.slparms.loginname will be parsed
     instead if it exists.

   Format of /etc/sliphome/slip.slparms*
     Comments (lines starting with a `#') and blank lines (or started with
     space) are ignored.  This file contains from one to three numeric parameters
 separated with spaces, in order: keepalive, outfill and slunit.

     keepalive	Set SLIP "keep alive" timeout in seconds.  If FRAME_END is not
		received in this amount of time, sliplogin closes the line and
		exits.	The default value is no timeout (zero).

     outfill	Set SLIP "out fill" timeout in seconds.  It forces at least
		one FRAME_END to be sent during this time period, which is
		necessary for the "keep alive" timeout on the remote side.
		The default value is no timeout (zero).

     slunit	Set the SLIP unit number directly.  Use with caution, because
		no check is made for two interfaces with same number.  By
		default sliplogin dynamically assigns the unit number.

     If latter two parameters are omitted, they will not affect the corresponding
 SLIP configuration.  If any of first two parameters is equal to
     zero, it will not affect the corresponding SLIP configuration.

EXAMPLES    [Toc]    [Back]

     The normal use of sliplogin is to create a /etc/passwd entry for each
     legal, remote slip site with sliplogin as the shell for that entry.

     Sfoo:ikhuy6:2010:1:slip line to foo:/tmp:/usr/sbin/sliplogin

     (Our convention is to name the account used by remote host hostname as
     Shostname.)  Then an entry is added to slip.hosts that looks like:

	   Sfoo    `hostname`	   foo	   netmask

     where `hostname` will be evaluated by sh(1) to the local host name and
     netmask is the local host IP netmask.

     Note that sliplogin must be setuid to root and, while not a security
     hole, moral defectives can use it to place terminal lines in an unusable
     state and/or deny access to legitimate users of a remote slip line.  To
     prevent this, sliplogin is installed as user root, group network and mode
     4550 so that only members of group network may run sliplogin.  The system
     administrator should make sure that all legitimate users are a member of
     the correct group.

DIAGNOSTICS    [Toc]    [Back]

     The sliplogin utility logs various information to the system log daemon,
     syslogd(8), with a facility code of daemon.  The messages are listed
     here, grouped by severity level.

     Error Severity    [Toc]    [Back]
     ioctl (TCGETS): reason
	     A TCGETS ioctl() to get the line parameters failed.

     ioctl (TCSETS): reason
	     A TCSETS ioctl() to set the line parameters failed.

     /etc/sliphome/slip.hosts: reason
	     The /etc/sliphome/slip.hosts file could not be opened.

     access denied for user
	     No entry for user was found in /etc/sliphome/slip.hosts.

     Notice Severity    [Toc]    [Back]
     attaching slip unit unit for loginname
	     SLIP unit unit was successfully attached.

FILES    [Toc]    [Back]

	     list of host login names and parameters.

	     script executed when a connection is made.

	     script executed when a connection is made by loginname.

	     script executed when a connection is lost.

	     script executed when a connection is lost by loginname.

	     extra parameters file.

	     extra parameters file for loginname.

	     contains the name of the network interface used by the sliplogin
	     process on ttyXn.

	     contains the PID of the sliplogin process which is using interface

SEE ALSO    [Toc]    [Back]

     slattach(8), syslogd(8)


HISTORY    [Toc]    [Back]

     The sliplogin utility appeared in 4.3BSD-Reno.

FreeBSD 5.2.1			January 5, 1994 		 FreeBSD 5.2.1
[ Back ]
 Similar pages
Name OS Title
slattach Linux attach a network interface to a serial line
slattach Tru64 Attaches a serial line to a network interface
slip FreeBSD attach serial lines as network interfaces
slattach FreeBSD attach serial lines as network interfaces
slattach OpenBSD attach serial lines as network interfaces
slip OpenBSD attach serial lines as network interfaces
slip IRIX Serial Line IP
dc Tru64 serial line/mouse/keyboard
slstat FreeBSD report serial line IP statistics
modem HP-UX asynchronous serial modem line control
Copyright © 2004-2005 DeniX Solutions SRL
newsletter delivery service